nanogui: Cannot bind to named socket
Subject:
Re: Cannot bind to named socket
From:
Jordan Crouse ####@####.####
Date:
21 May 2001 13:57:26 -0000
Message-Id: <01052107564004.23575@cosmic>
You are also getting an
'Cannot initialize keyboard'
error, which means that Microwindows was unable to open your keyboard. The
most common reason for this is that you don't have the correct TTY devices
available. Make sure that you have /dev/tty on your system, and that it
points to the correct device.
Jordan
Make sure that you
On Monday 21 May 2001 06:53, Gary James mentioned:
> One thing that will cause this error error is the inability to delete
> the file "/tmp/.nano-X". You may have problems with this if one user
> creates the file and then nano-X subsequently crashes if you try to
> run nano-X from another userid you will get this error. Here's a link
> to a discussion in the mail list on this topic.
>
> http://www.linuxhacker.org/cgi-bin/ezmlm-cgi/5/3211
>
> In general you can search the mail archive for problems like this.
> Use the following link to search the archive. When you search, put
> "nanogui" in the search text to filter out other projects on the
> linux hacker server.
>
> http://www.linuxhacker.org/search/
>
> Gary James
> ####@####.####
> http://home.twcny.rr.com/embedded
>
> > When I start nano-X,show as follow:
> >
> > Cannot initialize keyboard
> > Cannot bind to named socket
> >
> > Why?
> >
> > I start my linux like this;
> >
> > I wanna make a embed linux, so only kernel and init->bash, kernel start
> > with framebuffer,
> > when system start successfully, show as follow:
> >
> > bash#
> >
> > thank your spend time read my email.
>
> --
> Gary A James, Critical Link, LLC
> Voice: 315.425.4045 x218
> Fax: 315.425.4048
> E-Mail: ####@####.####
> WEB: http://www.criticallink.com
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
