nanogui: question about frambuffer
Subject:
Re: [nanogui] question about frambuffer
From:
jipi ####@####.####
Date:
1 Jun 2001 09:33:33 -0000
Message-Id: <3B1760D1.9A253E8C@sesl.global.sharp.co.jp>
cheng*
??? the way 1 u described sets a kernel command line parameter which
sets VGA mode to that particular hex number.. check out
??/Documentation/ to find out more about kernel parameters?? or u can
see the source code too. usually this parameter u set will enable a
default framebuffer mode which is vesa framebuffer mode if u used the
default linux installation (and depending on what the installer detects
your graphics card as)
daniel*
by the way... if u managed to enable a framebuffer console... u are
supposed to see a penguin logo on the upper left hand corner of your
screen...
maybe u can try checking your .config in your /usr/src/linux?? and see
whether the framebuffer option is enabled or not.
please elaborate more on your current set-up
jipi
"£«¥¿(PcHome)" wrote:
>
> I can init my frambuffer by this two ways:
>
> Way 1:
> 1. linuxconf <Enter>
> 2. - Config - boot mode - Lilo - Configure LILO defaults -
> Set "VGA mode" to 0x311
>
> Way 2:
> 1. /usr/src/linux/make menuconfig <Enter>
> 2. Console drivers - [ ] VGA 16-color graphics console
> Enable it.
>
> You can try it!!
>
> WCH
>
> ----- Original Message -----
> From: daniel ####@####.####
> To: ####@####.####
> Sent: Friday, June 01, 2001 4:49 PM
> Subject: [nanogui] question about frambuffer
>
> > hi all:
> > I am a newbie of linux, just install MicroWindows 0.89 pre7 on redhat 7=
> .1,
> study
> > to develop some applciation using MicroWindows, but I meet some problem
> when I
> > try to run demo program .
> > I found the error message:
> >
> > Error opening /dev/fb0: No Such Device
> > Cannot initialise screen: No Such Device
> >
> > I know it means can not access the framebuffer-device.
> > Cound anyone tell me how to configure kernel to support framebuffers.
> > pls tell me it in detials and step by step cos of i am a beginer.
> >
> > btw. from some linxu bbs i got some info that fbconfig is a tool to
> configure kernel,
> > but i can not find this tool in my system.
> >
> > _______
> > Regards
> >
> > Daniel Wang
> >
> >
>
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
> =3D=3D=3D=3D=3D=3D=3D=3D
> PC home =A7K=B6O=B9q=A4l=ABH=BDc=A1A=A5=D3=BD=D0=BD=D0=A6=DC: http://www=
> .pchome.com.tw=20
> PC home Online =BA=F4=B8=F4=AEa=AEx=A1@=A1@ =B7|=AD=FB=B2=C4=A4@=A1A=A5x=
> =C6W=B3=CC=A4j=AA=BA=A4J=A4f=BA=F4=AF=B8=20
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
> =3D=3D=3D=3D=3D=3D=3D=3D
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
