nanogui: (SA1100)TouchScreen's Edge!?
Subject:
Re: [nanogui] (SA1100)TouchScreen's Edge!?
From:
Jordan Crouse ####@####.####
Date:
23 Aug 2001 14:13:03 -0000
Message-Id: <01082308124500.03852@cosmic>
You can always calibratate and cacluate the raw x and y edges a little
better, but alot depends on how good your touchscreen is, and how good the
jitter control is in the touchscreen driver. I have an fairly good SA1100
touchscreen running right now, and I still get a lot of jitter and bad
points, especially as I move to the edge of the screen. Thats just part of
the game, I'm afraid.
Jordan
On Thursday 23 August 2001 02:04, Windy Bian mentioned:
> I opened drivers/char/ucb1200_ts.c
> Changed x_rev and y_rev to 1
> then touch screen can work well.
>
> BUT
>
> If you press point close to the left and right
> edges of the touchscreen (refer to the landscape
> format), the point activated is around 0.4cm away
> (towards the centre of the screen) from the point
> where the pressure is applied.
>
> How can it work more better?
>
> Windy Bian
>
>