nanogui: FLTK 1.1.4 code running on Microwindows 0.90 targeted to ARM
Subject:
Re: [nanogui] FLTK 1.1.4 code running on Microwindows 0.90 targeted
to ARM
From:
"Da'niel Csabai" ####@####.####
Date:
1 Mar 2004 17:04:21 -0000
Message-Id: <40436604.2010007@freemail.hu>
George Goh írta:
>FLNX 0.18 is based on FLTK 1.0.7, which is fine for the application that
>I'm developing. I suspect that there might be a problem with the display
>hardware on the 7202, although I'm not 100% sure. Like you, I've tried a
>lot of different settings on the software and none worked to correct the
>inverted colours.
>
>
Now I think so, too. I had bad colours (not really inverted) on a screen
with a 320x240 resolution.
I connected a screen with 640x480. It seems the blue replaced by red,
but green seems to be correct.
I am not sure, I need a test.
If I have right. It seems the driver or the processor documentation
cause the problem.
>I'm not using fluid because my GUI is rather simple - a scrollable menu
>and some instructions on one screen, and some graphs on another.
>
>
>
I have a more complex gui and I designed it with fluid, so I need. I
built a pc version fluid.
Regards & Thanks,
Daniel
>George.
>
>
>On Wed, 2004-02-25 at 15:38, Daniel Csabai wrote:
>
>
>>Hi George,
>>
>>
>>
>>
>>>Hi Daniel,
>>>
>>>I'm using the Hynix 7202 as well, and I'm using flnx 0.18 with
>>>microwindows 0.90. For me, using flnx with microwindows means I only
>>>have to worry about 2 packages instead of 3(fltk + nxlib + microwin).
>>>
>>>
>>>
>>>
>>>
>>Thank you your mail. That is good to know about somebody who is also
>>dealing with Hynix . the 2 packages is more clearer configuration,
>>but maybe it cause more problem. My program is written in fltk 1.1.4 and
>>flnx 0.18 seems to base on older fltk version.
>>
>>
>>
>>>I tried fltk with nxlib before, and I got displays which had inverted
>>>colours, no matter what config I used. This problem went away when I
>>>reverted back to flnx.
>>>
>>>
>>>
>>>
>>>
>>I got to work my program on my hw with microwin + nxlib + fltk
>>configuration. I faced with this problem of bad colours.
>>I recognized there are two calls (XgetDefault and XSetErrorHandler) are
>>not handled (they are in stub.c). Maybe they make the problem.
>>What is your experience with flnx? Which fluid version do you use?
>>
>>Regards,
>>Daniel
>>
>>
>
>
>
>
>