nanogui: R: [nanogui] USB Mouse
Subject:
Re: [nanogui] R: [nanogui] USB Mouse
From:
Fabio Giovagnini ####@####.####
Date:
23 Sep 2005 17:28:26 +0100
Message-Id: <200509231828.34237.fabio.giovagnini@aurion-tech.com>
Alle 11:26, venerdì 23 settembre 2005, Sanges Michele ha scritto:
> > -----Messaggio originale-----
> > Da: Fabio Giovagnini ####@####.####
> > Hi Michele.
> > In my opinion the first thing to do is being sure you r
> > kernel recognize correctly your usb mouse.
>
> Hi Fabio,
> yes my kernel recognize correctly my usb mouse; it's the same kernel
> (2.6.9-1.667) I'm using in my host hardware. At the target side, I'm using
> Busybox filesystem; the devices are created by means 'udev' and at the
> booting time I load the 'uhci_hcd.ko' module.
>
> > If yes, you have to follow the same way to enable a serial or
> > ps/2 mouse.
>
> In other words, I must compile nano-x with the SERMOUSE option setted to
> 'Y'? If yes, when I run nano-x, it search for the /dev/psaux device that is
> not present in my filesystem.
Not exactly; I mean if you kernel ercognize the USB mouse, in your dev fs you
will have teh corresponding /dev/usbmouse; so I think you need to write the
nano-X driver of such a mouse in the same way the driver for sermouse or
psaux if it is not yet present in nano-X.
I think this is the way.
Maybe Greg can give us more informations.
Bye and Regards
>
> Any help is very appreciaded.
>
> Regards.
>
> > Alle 08:23, giovedì 22 settembre 2005, Sanges Michele ha scritto:
> > > How do I set the config file in order to run the Nano-X
> >
> > server with a USB
> >
> > > mouse?
>
> Michele Sanges
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
--
Fabio Giovagnini
Aurion s.r.l.
www.aurion-tech.com
