nanogui: Thread: Cross compilation error-ARM

Hi all,
      I am new to  microwindows related stuffs.I got some problem while I was trying to cross compile microwindows-0.89pre7.tar.gz (downloaded from http://microwindows.org) for ARM 7TDMI.
I got following error
 ".
..   
Compiling vgaplan4.c

In file included from vgaplan4.c:23

Vgaplan4.h:22:54: sys/io.h:No such file or directory

Make[1]:***[vgaplan4.o] Error 1

..

.....

...

Compiling mtest2.c

Make[2]:*** No rule to make target '/mwdownload/Raj/microwin/src/lib/libmwdrivers.a',needed by '/mwdownload/Raj/microwin/src/bin/mdemo',stop."

I observed that in my directory '/mwdownload/Raj/microwin/src/lib',libmwdrivers.a is not available.io.h is available in usr/include/sys directory.How can I get libmwdrivers.a?It is not available in the tar ball.

How can I rectify the above error?I have enclosed my config file for your reference.Should I change any options in my config file?

Thanks,

With Regards,

N.Rajkumar

Rajkumar N. wrote:
> from http://microwindows.org) for ARM 7TDMI.
> Compiling vgaplan4.c

The VGA16 framebuffer driver only works on PC hardware.

-- 
------------ Alex Holden - http://www.linuxhacker.org ------------
If it doesn't work, you're not hitting it with a big enough hammer

Set FBVGA=N to remove this driver for the cross-compilation.

Regards,

Greg

      I am new to  microwindows related stuffs.I got some problem while I was trying to cross compile microwindows-0.89pre7.tar.gz (downloaded from http://microwindows.org) for ARM 7TDMI.
  I got following error
   ".
  ..   
  Compiling vgaplan4.c

  In file included from vgaplan4.c:23

  Vgaplan4.h:22:54: sys/io.h:No such file or directory

  Make[1]:***[vgaplan4.o] Error 1

  ..

  .....

  ...

  Compiling mtest2.c

  Make[2]:*** No rule to make target '/mwdownload/Raj/microwin/src/lib/libmwdrivers.a',needed by '/mwdownload/Raj/microwin/src/bin/mdemo',stop."

  I observed that in my directory '/mwdownload/Raj/microwin/src/lib',libmwdrivers.a is not available.io.h is available in usr/include/sys directory.How can I get libmwdrivers.a?It is not available in the tar ball.

  How can I rectify the above error?I have enclosed my config file for your reference.Should I change any options in my config file?

  Thanks,

  With Regards,

  N.Rajkumar



------------------------------------------------------------------------------


  ---------------------------------------------------------------------
  To unsubscribe, e-mail: ####@####.####
  For additional commands, e-mail: ####@####.####