nanogui: Thread: dis chinese font

 
 
1.I want to display chinese font,when I compiled microwin-0.91,it have errors" /t1demo.c </DIV>
<DIV>MWTF_DBCS_GB undeclared".how can I do now? 
2.what diffrerences between I set "HAVE_HZK_SUPPORT and HAVE_GB2312_SUPPORT Y"and just 
set"HAVE_GB2312_SUPPORT Y"
thanks.
 

: 1.I want to display chinese font,when I compiled microwin-0.91,it have
errors" /t1demo.c
: MWTF_DBCS_GB undeclared".how can I do now?

Sounds like that needs to be MWTF_DBCS_GB2312



: 2.what diffrerences between I set "HAVE_HZK_SUPPORT and
HAVE_GB2312_SUPPORT Y"and just
: set"HAVE_GB2312_SUPPORT Y"

Both options are quite obsolete, that's likely why
the problem above.  The new method is to use PCF
or FNT font files, and use a unicode chinese font,
any one you like.

In the old method, above, only one can be set at a time,
and a font that is in the src/fonts/chinese directory
is used.  The GB2312 is compiled in, the HZK font is
a 16x16 font in a special format font file.

Regards,

Greg

 
 
 
I use MWTF_DBCS_GB2312 instead of MWTF_DBCS_GB,when I compiled.it has errors" /t1demo.c MWTF_DBCS_GB2312 undeclared".
I try other ways ,when I run t1demo,I can not see chinese font.
 
 
 
 

 
 
 
follow as you  said ,I choose FNY yes,and I run t1demo ,also not see chinese font .So I make  "*name[]=name[5],funm=4"in t1demo.c,I think then it can just display chinese font.but it can compiled,when run it,it will stop program. why??

Set
HAVE_HZK_SUPPORT = Y
at the same time.