nanogui: Thread: Re: Can't open graphics - Issue

But If I disable keyboard in config .... still I see the ""nxclient:"" error
as shown in the log below;;(my last mail)

-----Original Message-----
From: Greg Haerr ####@####.#### 
Sent: Thursday, June 19, 2008 10:07 PM
To: Tapan Roy
Subject: Re: Can't open graphics - Issue

: KDGKMODE: Invalid argument
: Cannot initialise keyboard

Your keyboard is not configured properly.

Greg

-----Original Message-----
From: Tapan Roy ####@####.#### 
Sent: Thursday, June 19, 2008 5:49 PM
To: 'Greg Haerr'
Subject: Can't open graphics - Issue

My Objective::
a) Nano-X porting on ARM platform. (Cirrus Graphics chipset eb9307b) 
b) Kernal 2.6 already ported on the board.
c) Made X11 to - Off mode and framebuffer - ON mode
d)
  
Please suggest::::
1. What may be the reason for the below nxclient issue:::

2. Do you already have any working Arm-Config file to help out.

[1] 6060
KDGKMODE: Invalid argument
Cannot initialise keyboard
[1]+  Exit 1                  bin/nano-X
nxclient: retry connect attempt 1
nxclient: retry connect attempt 2
:::::::::::::::::
:::::::::::::::::

Thanks in advance
-Tapan

Gateway Anti virus Scanned
Rebaca Technologies Pvt. Limited

: [1] 6060
: KDGKMODE: Invalid argument
: Cannot initialise keyboard
: [1]+  Exit 1                  bin/nano-X

The above error message means that the target keyboard
 is not properly configured for nano-X.  Nano-X
then exits.

: nxclient: retry connect attempt 1
: nxclient: retry connect attempt 2

These messages are output by nano-X client
programs when they can't connect to the server.
Of course, the server isn't running.

If LINK_APP_INTO_SERVER=Y, then the
server is linked into the client application.  In this
case, nano-X must not be run beforehand, just
the client program.  Also, only one client program
can run, not multiple ones.

Regards,

Greg