plustek: Need more info on EPSON
Subject:
Need more info on EPSON
From:
"Jaeger, Gerhard" ####@####.####
Date:
2 Mar 2002 09:20:04 -0000
Message-Id: <16h5Ze-1Bn9iiC@fmrl01.sul.t-online.com>
Hi there,
let me try to bring back history in my mind!
0.41_3 does not work because the sensor hits the scanbed
and the MODEL_NOPLUZSTEK stuff hasn't been integrated -right?
0.41_4 works, but the calibrations stuff isn't that good!
0.41_5 should work too - only changes at the parallel port stuff
0.42_[0..3] won't work anymore, here are major changes:
gamma table download (this works, and should also for the EPSON
UMAX 3400 stuff has been integrated (I think this breaks the stuff)
Please check again 0.41_4/5 and tell me the results.
If you'Re able to patch something, use the 0.42_3 and look for the _WAF_
flags in the code - you might remove the UMAX specific stuff and test
again...
Thanks for helping
Gerhard
On Friday, 1. March 2002 19:45, Stealth Dave wrote:
> Okay, second round of testing.
>
> First, the Makefile stuff worked. I was able to compile with no
> problems.
>
> Unfortunately, the Epson 1250 still comes up with a black screen in the
> XSane preview window. This is true with or without the _GENE_ flag.
> These are the same results that I had with 0.42-0. No errors, just
> incorrect output.
>
> Keep up the good work, and let me know if I can be of more help!
>
> - Stealth Dave