plustek: scanner genius ColorPage Vivid Pro II


Previous by date: 26 Mar 2002 07:51:47 -0000 Re: Epson Perfection 1250/sane-1.0.7/plustek-sane-0_42_5, Jaeger, Gerhard
Next by date: 26 Mar 2002 07:51:47 -0000 Re: Plustek 9636P detection, Jaeger, Gerhard
Previous in thread: 26 Mar 2002 07:51:47 -0000 scanner genius ColorPage Vivid Pro II, Edson Angelo Carara
Next in thread: 26 Mar 2002 07:51:47 -0000 Re: scanner genius ColorPage Vivid Pro II, Edson Angelo Carara

Subject: Re: scanner genius ColorPage Vivid Pro II
From: "Jaeger, Gerhard" ####@####.####
Date: 26 Mar 2002 07:51:47 -0000
Message-Id: <200203260720.IAA02976@kah.ulm.sysgo.de>

Hi,

it seems that there's also a communication problem between
the driver an the scanner...
Enable the debug messages for the driver:
cd [your-directory]/plustek_driver
make clean
make all DEBUG=y
then as root:
make install
make load

Then send this output to the list again.

You might play around with various parallel-port modes
(in the BIOS) and or try and use the forceMode switch
(see man page for this one)

Gerhard

On Montag, 25. März 2002 17:36, Edson Angelo Carara wrote:
> Hi,
>
> I'am trying to install drive plustek for scanner genius ColorPage Vivid Pro
> II. According to  FCC the manufacture is primax and as homepage of  Sane
> the driver is plustek.
> I followed steps this homepage and tips too, but not OK.
> When I type "make load" the following message of  error is show:
>
> /sbin/modprobe pt_drv || exit 1
> /lib/modules/2.4.18/misc/pt_drv.o: init_module: Success
> Hint: insmod errors can be caused by incorrect module parameters, including
> invalid IO or IRQ parameters
> /lib/modules/2.4.18/misc/pt_drv.o: insmod /lib/modules/2.4.18/misc/pt_drv.o
> failed
> /lib/modules/2.4.18/misc/pt_drv.o: insmod pt_drv failed
> make: ** [load] Erro 1
>
> and the following lines are added in log
>
> Mar 25 12:16:18 informatica01 kernel: devfs_mk_dir(scanner): using old
> entry in dir: c11fd5c0 ""
> Mar 25 12:16:18 informatica01 kernel: pt_drv : driver version 0.42-6
> Mar 25 12:16:18 informatica01 kernel: parport0: PC-style at 0x378
> [PCSPP(,...)]
> Mar 25 12:16:18 informatica01 kernel: pt_drv : no device(s) detected,
> (-9020)
>
> I'am using sane 1.0.7 and kernel 2.4.8 compiled without support IEEE 1284,
> mandrake linux 8.1 and plustek driver 0.42.
>
> Please, Any help will be very important I to give plus this pacing in the
> platform linux
>
> Thanks


Previous by date: 26 Mar 2002 07:51:47 -0000 Re: Epson Perfection 1250/sane-1.0.7/plustek-sane-0_42_5, Jaeger, Gerhard
Next by date: 26 Mar 2002 07:51:47 -0000 Re: Plustek 9636P detection, Jaeger, Gerhard
Previous in thread: 26 Mar 2002 07:51:47 -0000 scanner genius ColorPage Vivid Pro II, Edson Angelo Carara
Next in thread: 26 Mar 2002 07:51:47 -0000 Re: scanner genius ColorPage Vivid Pro II, Edson Angelo Carara


Powered by ezmlm-browse 0.20.