Subject:
Problems with loading pt_drv
From:
Montier Jacques ####@####.####
Date:
10 Apr 2002 14:59:36 -0000
Message-Id: <20020410145211.840B516FC@relay-1m.club-internet.fr>
Hi,
I have some problems with loading pt_drv for my Optic pro 9636T scanner.
I get the error message :
/lib/modules/2.4.8-26mdk/misc/pt_drv.o: init_modules: Success
Hint : insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
insmod pt_drv failed.
My configuration is :
AMD Athlon 1.2 GHz 512 Mo
Mandrake 8.1 with 2.4.8-26 kernel
sane 1.0.5 (backend et frontend)
plustek module 0.40.17
I join the kernel messages (plustek.messages).
Thank you for your help, I'm lost !!!
Jacques Montier
routing conflict for 00:07.3, have irq 5, want irq 11
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 11 for device 00:07.3
IRQ routing conflict for 00:07.2, have irq 5, want irq 11
IRQ routing conflict for 00:07.3, have irq 5, want irq 11
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 5
usb-uhci.c: Detected 2 ports
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
usb.c: USB device 2 (vend/prod 0x6b9/0x4061) is not claimed by any active driver.
ip_tables: (c)2000 Netfilter core team
ip_conntrack (4095 buckets, 32760 max)
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 192 rq 18 len 8 ret -110
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 192 rq 18 len 8 ret -110
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 192 rq 18 len 8 ret -110
HDLC line discipline: version 3.2, maxframe=4096
N_HDLC line discipline registered.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.1
EXT2-fs error (device ide0(3,6)): ext2_free_inode: bit already cleared for inode 600583
devfs: devfs_register(): device already registered: "0"
lp0: using parport0 (interrupt-driven).
Installing knfsd (copyright (C) 1996 ####@####.####
EXT2-fs error (device ide0(3,6)): ext2_free_inode: bit already cleared for inode 600579
EXT2-fs error (device ide0(3,6)): ext2_free_inode: bit already cleared for inode 600582
EXT2-fs error (device ide0(3,6)): ext2_free_inode: bit already cleared for inode 600581
EXT2-fs error (device ide0(3,6)): ext2_free_inode: bit already cleared for inode 600580
EXT2-fs error (device ide0(3,6)): ext2_free_inode: bit already cleared for inode 600584
EXT2-fs error (device ide0(3,6)): ext2_free_inode: bit already cleared for inode 600585
Via 686a audio driver 1.1.14b
PCI: Found IRQ 10 for device 00:07.5
IRQ routing conflict for 00:07.5, have irq 11, want irq 10
PCI: Sharing IRQ 10 with 00:09.0
ac97_codec: AC97 Audio codec, id: 0x4943:0x4511 (ICE1232)
via82cxxx: board #1 at 0xDC00, IRQ 11
[drm] Initialized powervr 1.0.0 20011022 on minor 0
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.40-18
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xdcb2c000
Using fast I/O
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x0045)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP EPP EPP(ECP)
Using EPP-mode
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x50, port=0x378
p48xxReadWriteTest()
Can't find your model, asic = 0x5a
detectScannerConnection() returns -9031.
************* ASIC9800x *************
IOInitialize()
ASIC = 0x81
************* ASIC98001 *************
ModelSet9636()
ModelSet9360()
modelInitPageSettings()
A4 set
ModelSet9630() done.
Model Override --> 9636P
modelInitPageSettings()
A4 set
ModelSet9636() done.
P9636InitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
0x81
CCID = 0x00
P9636InitAsic() done.
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x10, port=0x378
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
detectScannerConnection() returns -9020.
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv: proc del 'info' root='pt_drv'
pt_drv: proc del 'pt_drv' root='/proc'
pt_drv : no device(s) detected, (-9020)
---------------------------------------------
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.40-18
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xd54e8000
Using fast I/O
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x0045)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP EPP EPP(ECP)
Using EPP-mode
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x50, port=0x378
p48xxReadWriteTest()
Can't find your model, asic = 0x5a
detectScannerConnection() returns -9031.
************* ASIC9800x *************
IOInitialize()
ASIC = 0x81
************* ASIC98001 *************
ModelSet9636()
ModelSet9360()
modelInitPageSettings()
A4 set
ModelSet9630() done.
Model Override --> 9636P
modelInitPageSettings()
A4 set
ModelSet9636() done.
P9636InitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
0x81
CCID = 0x00
P9636InitAsic() done.
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x10, port=0x378
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
detectScannerConnection() returns -9020.
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv: proc del 'info' root='pt_drv'
pt_drv: proc del 'pt_drv' root='/proc'
pt_drv : no device(s) detected, (-9020)
---------------------------------------------
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.40-18
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xd54e8000
Using fast I/O
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x0045)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP EPP EPP(ECP)
Using EPP-mode
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x50, port=0x378
p48xxReadWriteTest()
Can't find your model, asic = 0x5a
detectScannerConnection() returns -9031.
************* ASIC9800x *************
IOInitialize()
ASIC = 0x81
************* ASIC98001 *************
ModelSet9636()
ModelSet9360()
modelInitPageSettings()
A4 set
ModelSet9630() done.
Model Override --> 9636P
modelInitPageSettings()
A4 set
ModelSet9636() done.
P9636InitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
0x81
CCID = 0x00
P9636InitAsic() done.
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x10, port=0x378
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
detectScannerConnection() returns -9020.
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv: proc del 'info' root='pt_drv'
pt_drv: proc del 'pt_drv' root='/proc'
pt_drv : no device(s) detected, (-9020)
---------------------------------------------
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.40-18
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xd54e8000
Using fast I/O
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x0045)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP EPP EPP(ECP)
Using EPP-mode
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x50, port=0x378
p48xxReadWriteTest()
Can't find your model, asic = 0x5a
detectScannerConnection() returns -9031.
************* ASIC9800x *************
IOInitialize()
ASIC = 0x81
************* ASIC98001 *************
ModelSet9636()
ModelSet9360()
Model Override --> 9630PL
modelInitPageSettings()
Legal set
ModelSet9630() done.
modelInitPageSettings()
A4 set
ModelSet9636() done.
P9636InitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
0x81
CCID = 0x00
P9636InitAsic() done.
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x10, port=0x378
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
detectScannerConnection() returns -9020.
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv: proc del 'info' root='pt_drv'
pt_drv: proc del 'pt_drv' root='/proc'
pt_drv : no device(s) detected, (-9020)
---------------------------------------------
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.40-18
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xd54e8000
Using fast I/O
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x0045)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP EPP EPP(ECP)
Using EPP-mode
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x50, port=0x378
p48xxReadWriteTest()
Can't find your model, asic = 0x5a
detectScannerConnection() returns -9031.
************* ASIC9800x *************
IOInitialize()
ASIC = 0x81
************* ASIC98001 *************
ModelSet9636()
ModelSet9360()
modelInitPageSettings()
A4 set
ModelSet9630() done.
modelInitPageSettings()
A4 set
ModelSet9636() done.
P9636InitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
0x81
CCID = 0x00
P9636InitAsic() done.
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x10, port=0x378
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
detectScannerConnection() returns -9020.
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv: proc del 'info' root='pt_drv'
pt_drv: proc del 'pt_drv' root='/proc'
pt_drv : no device(s) detected, (-9020)
---------------------------------------------
*********************************************
pt_drv: init_module()
pt_drv : driver version 0.40-18
ProcFsInitialize()
ptdrvInit(0)
Init settings done
ScanData = 0xd54e8000
Using fast I/O
Requested port at 0x378
Requested port (0x378) found
Port mode reported: (0x0045)
Port for device 0 registered
ptdrvOpen(port=0x378)
Try to claim the parport
parport-modi: SPP EPP EPP(ECP)
Using EPP-mode
Starting Scanner-Autodetection
************ DETECTP48xx ************
ModelSet4800()
modelInitPageSettings()
A4 set
ModelSet4800() done.
P48xxInitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x50, port=0x378
p48xxReadWriteTest()
Can't find your model, asic = 0x5a
detectScannerConnection() returns -9031.
************* ASIC9800x *************
IOInitialize()
ASIC = 0x81
************* ASIC98001 *************
ModelSet9636()
ModelSet9360()
Model Override --> 9630PL
modelInitPageSettings()
Legal set
ModelSet9630() done.
modelInitPageSettings()
A4 set
ModelSet9636() done.
P9636InitAsic()
DacInitialize()
ImageInitialize()
IOFuncInitialize()
IOInitialize()
MotorInitialize()
0x81
CCID = 0x00
P9636InitAsic() done.
Dataport = 0x0378
Ctrlport = 0x037a
Test 0x55
Test 0xAA
Compare data=0x40 and status=0x10, port=0x378
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
ioP98ReadWriteTest()
Error in memory test at pos 0 (0 != 255)
detectScannerConnection() returns -9020.
*** DETECTION DONE, result: -9020 ***
ptdrvClose()
MiscRestorePort()
- no need to restore portmode !
Releasing parport
ptdrvShutdown()
cleanup device 0
Port unregistered
ProcFsShutdown()
pt_drv: proc del 'info' root='pt_drv'
pt_drv: proc del 'pt_drv' root='/proc'
pt_drv : no device(s) detected, (-9020)
---------------------------------------------
