plustek: Problems load module w. SuSE7.3 @ Kernel 2.4.16
Subject:
Re: Problems load module w. SuSE7.3 @ Kernel 2.4.16
From:
"Jaeger, Gerhard" ####@####.####
Date:
2 May 2002 06:06:40 -0000
Message-Id: <1739aq-22NccCC@fmrl07.sul.t-online.com>
Hi Christof,
the scanner (the ASIC of it) has been detected correctly!
The problem is the memory test, that checks the data-transfers
in EPP mode. This does not work! You may paly around with the
BIOS settings for the parport (set it to SPP or EPP) and/or play around
with slowIO=1 parameter...
Hope this helps
Gerhard
On Thursday, 18. April 2002 21:52, Christof Bodner wrote:
[SNIP]
> ModelSet4830() done.
> p48xxDoTest()
> Bank 0 overwritten
> found 0 bytes of memory
> No memory ! No scanner...
> p48xxReadWriteTest()
> Found a 96003 ASIC at Reg 0x13
> ModelSet4830()
> modelInitPageSettings()
> A4 set
> ModelSet4830() done.
> p48xxDoTest()
> Bank 0 overwritten
> found 0 bytes of memory
> No memory ! No scanner...
> p48xxReadWriteTest()
> Found a 96003 ASIC at Reg 0x13
> ModelSet4830()
> modelInitPageSettings()
> A4 set
> ModelSet4830() done.
> p48xxDoTest()
> Bank 0 overwritten
> found 0 bytes of memory
> No memory ! No scanner...
> p48xxReadWriteTest()
> Found a 96003 ASIC at Reg 0x13
> ModelSet4830()
> modelInitPageSettings()
> A4 set
> ModelSet4830() done.
> p48xxDoTest()
> Bank 0 overwritten
> found 0 bytes of memory
> No memory ! No scanner...
> p48xxReadWriteTest()
> Found a 96003 ASIC at Reg 0x13
> ModelSet4830()
> modelInitPageSettings()
> A4 set
> ModelSet4830() done.
> p48xxDoTest()
> Bank 0 overwritten
> found 0 bytes of memory
> No memory ! No scanner...
> detectScannerConnection() returns -9020.
[SNAP]
