plustek: hp 2200c scanner
Subject:
Re: hp 2200c scanner
From:
"Jaeger, Gerhard" ####@####.####
Date:
2 May 2002 21:12:44 -0000
Message-Id: <173NZL-1gPdNQC@fmrl06.sul.t-online.com>
The problem here is maybe a calibration problem!
I know that the calibration is only good for Plustek
devices, but I thought HP scanners work also very well.
Can you send me an example pic? (Only a small one please ;-)
Gerhard
On Sunday, 21. April 2002 00:24, Tom Epperly wrote:
> I just purchased a HP 2200c scanner and plugged it into my Debian Linux
> 2.4.18 box. I configured sane and tried scanning with xsane. There are
> blue lines from top to bottom when I scan a while background or when I
> scan a page of text.
>
> Should I suspect the hardware or the software? Is there anything I
> should try before returning the scanner? Please send replies directly
> to me.
>
> Tom
>
> sarantium:/etc/sane.d# scanimage -L
> device `plustek:/dev/usbscanner' is a Hewlett-Packard Scanjet 2200c USB
> flatbed scanner
> sarantium:/etc/sane.d# dpkg --list libsane
> Desired=Unknown/Install/Remove/Purge/Hold
>
> Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed
>
> |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err:
>
> uppercase=bad)
>
> ||/ Name Version Description
>
> +++-==============-==============-=========================================
>=== ii libsane 1.0.7-3.2 API library for scanners
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####