plustek: HP2100C, a bit further
Subject:
Re: HP2100C, a bit further
From:
"Jaeger, Gerhard" ####@####.####
Date:
4 Jun 2002 16:58:36 -0000
Message-Id: <17FHTR-2JiFkGC@fmrl04.sul.t-online.com>
On Tuesday, 4. June 2002 18:21, Eric Fournié wrote:
> Hello,
>
> I went a bit further in setting up my hp scanjet 2100C. By plugging the
> usb cable after loading the module with "modprobe scanner vendor=0x03f0
> product=0x0505" (thanks to Trevor Semeniuk), sane-find-scanner returns:
>
> sane-find-scanner: found USB scanner (vendor = 0x03f0, product = 0x0505)
> at device /dev/usbscanner
>
> and scanimage -L returns:
>
> device `plustek:/dev/usbscanner' is a Hewlett-Packard Scanjet 2100c USB
> flatbed scanner
>
> If I start xsane, the device is recognized, and I can get a nice
> preview. The odd thing is that after the preview, if I try to acquire a
> picture, it does not work. xsane does not react anymore and the scanner
> light stays on. After a few seconds the sensor moves from a few mm and
> nothing more happens. With scanimage in a console I get the same
> reaction.
>
> Does anyone have an idea? If I can acquire a preview, I should be able
> to get the whole acquisition...
>
> Thanks for the help and for the software anyway.
>
> Eric
>
>
You might set the warmup in plustek.conf to 0...
Gerhard
--
-------------------------
gerhard AT gjaeger DOT de
