plustek: PLUSTEK: Ganius CP-HR7X Slim - Fail - Help to get it working !!!
Subject:
RES: PLUSTEK: Ganius CP-HR7X Slim - Fail - Help to get it working
!!!
From:
"Junior, Ricardo (t)" ####@####.####
Date:
29 Oct 2002 19:30:40 -0000
Message-Id: <6849495BC0DED61188D500080245C6D11279B7@exchange-rio.bowneglobal.com.br>
Hi Gerhard,
I have opened my scanner and I saw that it really has a GL646USB
chip.
I've found a PDF that seems to be a lot of tech information... but I
don't know if it has enough information to someone understand and build a
backend for that chip...
Could you take a look on it to see if it has the necessary
information about it?
Here is the link:
http://www.genesyslogic.com/pdf/gl646usb_r14.pdf
By the way, could you send me the documentation of some USB chip
already supported by plustek?
With the documentation of some chip, I pretend to get the source
code of plustek and try to understand it... Maybe I can learn to develop
backend drivers ;)
Thanks in advance,
_________________________________
Ricardo J. A. Júnior, Software Engineer Trainee
Bowne Global Solutions - Brazil «««««
( +55 21 2515 7713
- ####@####.####
: http://www.bowneglobal.com.br/
-----Mensagem original-----
De: Junior, Ricardo (t) ####@####.####
Enviada em: Tuesday, October 29, 2002 1:54 AM
Para: ####@####.#### '; '
Assunto: PLUSTEK: Ganius CP-HR7X Slim - Fail - Help to get it working !!!
Prioridade: Alta
Hi All !
I've tried to make my scanner "Genius ColorPage HR7X Slim" (USB) work on
linux with plustek backend, but without success.
I'm using Mandrake 9.0 without updateds:
Kernel 2.4.19-16mdk
sane-backends-1.0.8-5mdk
libsane1-devel-1.0.8-5mdk
libsane1-1.0.8-5mdk
I have already run "modprobe scanner" command and it was loaded
successfuly.
My device is on /dev/usb/scanner0.
And "sane-find-scanner" can find it properly, but scanimage seems to be
not able to comunicate with it.
I'm sending attached a TEXT file with the most relevant commands and them
outputs (in debug mode). (scanimage with maximum debug messesnger enabled.)
I know PHP develop language... but I know the basic of C/C++ and I want
to help the SANE project... (and if is possible, have my scanner working on
linux too ;) )
What can I do to help you to get my scanner linux ready?
How can I know the chip of my scanner? (to verify if is a LM9831/2/3
based USB scanners)
Cheers,
Ricardo Jr.
--------------------
From Rio de Janeiro - Brazil
-----------------------------
"All for one, our burning hearts will live forever
One for all, together standing strong!" (HammerFall-HammerFall)