plustek: Plustek 4380P: Error during device I/O
Subject:
Re: Plustek 4380P: Error during device I/O
From:
"Jaeger, Gerhard" ####@####.####
Date:
8 Jan 2003 19:48:59 -0000
Message-Id: <18WM3y-2Ipo3sC@fmrl07.sul.t-online.com>
Before starting scanimage, please enable the debug-output:
export SANE_DEBUG_PLUSTEK=12 ; scanimage > plustek:/dev/pt_drv0 > test.ppm
and send the output to the list.
Gerhard
On Friday, 3. January 2003 22:33, Robert Fendt wrote:
> Hi *,
>
> I have a good-ol' Plustek 4380P hooked up to my Linux-Box (Debian 3.0,
> Kernel 2.2.19pre17, libsane 1.0.7). I am trying to get it going BUT: I keep
> getting the above error message when trying 'scanimage -d
> plustek:/dev/pt_drv0 > test.ppm'. Here's what I did so far:
>
> - Enabled EPP mode for /dev/lp0 in BIOS;
> - Downloaded 'plustek-module-0_42_9' and installed 'pt_drv'. Here is
> /etc/modules.conf: ### update-modules: start processing
> /etc/modutils/parscanner alias char-major-40 pt_drv
> pre-install pt_drv modprobe -k parport
> options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=1 mov=0
> ### update-modules: end processing /etc/modutils/parscanner
> - When the machine boots, I see:
> ...
> pt_drv : driver version 0.42-10
> parport0: PC-style at 0x378 [SPP,PS2,EPP]
> parport_probe: failed
> parport0: no IEEE-1284 device present.
> pt_drv0: 600P/6000P found on port 0x0378
> pt_drv0: Lamp-Timer set to 180 seconds.
> pt_drv0: WarmUp period set to 15 seconds.
> pt_drv0: Lamp switch-off on driver unload.
> ....
> lsmod says:
> ....
> Module Size Used by
> parport_probe 3376 0 (autoclean)
> parport_pc 7360 1 (autoclean)
> pt_drv 106816 0
> parport 7972 1 [parport_probe parport_pc
> pt_drv] eepro100 16552 1
> vfat 9304 0 (unused)
> smbfs 26200 0 (unused)
> ntfs 34496 0 (unused)
> nfs 41672 1
> lockd 43524 1 [nfs]
> sunrpc 63396 1 [nfs lockd]
> unix 12036 18 (autoclean)
>
> - When doing an 'rmmod pt_drv', the lamp in the scanner goes out as set in
> the config file, 'modprobe pt_drv' turns the lamp back on and loads the
> module as expected. - Got 'sane-backends-1.0.9.tar.gz', compiled and
> installed it, but scanimage won't work. (scanimage: open of device
> plustek:/dev/pt_drv0 failed: Error during device I/O). - I also tried
> 'pt_drv' instead of 'pt_drv0'.
>
> Any help would be greatly appreciated.
>
> Regards,
> Robert Fendt
>
> __________________________________________________________________
> The NEW Netscape 7.0 browser is now available. Upgrade now!
> http://channels.netscape.com/ns/browsers/download.jsp
>
> Get your own FREE, personal Netscape Mail account today at
> http://webmail.netscape.com/