plustek: help using a Canonscan LiDE 20
Subject:
Re: help using a Canonscan LiDE 20
From:
Bret Comstock Waldow ####@####.####
Date:
6 Feb 2003 11:28:12 -0000
Message-Id: <1044504323.1243.3.camel@ganesha>
Hi,
I downloaded, made, and installed sane 1.0.10. I made the configuration
changes (below) in /etc/sane.d/plustek.conf.
I even rebooted.
xsane says there's no scanner. cat /proc/bus/usb/devices says there is
(as below).
What now?
Thanks in advance,
Bret
On Tue, 2003-02-04 at 07:56, Gerhard Jaeger wrote:
>
> Hi,
>
> On Montag, 3. Februar 2003 22:07, Bret Comstock Waldow wrote:
> [SNIPSNAP]
> > I've made the module and installed it from
> > plustek-module-0_42_9.tar.gz. There were no errors reported and the
> > build completed as did "make install".
>
> see Eriks' mail! Only needed for the parallelport devices!!!
>
> > Here are some things I think would be relevant from what I've read:
> > [root@ganesha temp]# cat /etc/modules.conf
> >
> > # for Canonscan LiDE 20
> > options scanner vendor=0x04a9 product=0x220d
>
> looks okay!
>
> > [root@ganesha plustek_driver]# rpm --query sane-backends
> > sane-backends-1.0.8-5
> > [root@ganesha plustek_driver]# rpm --query sane-frontends
> > sane-frontends-1.0.8-4
> >
> >
> Here's the problem, you'll need SANE-1.0.10!!!!
>
> Cheers
> Gerhard
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
