plustek: My Epson Perfection 1250 wont work...
Subject:
My Epson Perfection 1250 wont work...
From:
Douglas Phillipson ####@####.####
Date:
20 Feb 2003 08:08:20 -0000
Message-Id: <3E5489A5.4040205@intermind.net>
I'm using sane-backends-1.0.11 with a Epson Perfection 1250 USB scanner.
The scanner shows up with "usbview" and sane-find-scanner:
####@####.#### sane-find-scanner
found USB scanner (vendor=0x04b8, product=0x010f) at /dev/usb/scanner0
found USB scanner (vendor=0x04b8, product=0x010f) at /dev/usbscanner
# Your USB scanner was detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
But "scanimage" reports:
scanimage -d epson:/dev/usb/scanner0
[epson] The device at /dev/usb/scanner0 is not a supported EPSON scanner
(product id=0x10f)
[epson] Error opening the devicescanimage: open of device
epson:/dev/usb/scanner0 failed: Invalid argument
My /etc/sane.d/epson.conf reads:
usb /dev/usb/scanner0
My /etc/sane.d/plustek.conf reads:
[usb] 0x04B8 0x010f
device /dev/usbscanner
option lampOff 0
option warmup 10
This scanner is in the compatibility chart. Does anyone know what might
be going on here?
Thanks
Doug Phillipson
