[Lists] [Configure] [<<] [<] [by Thread] [by Date] [>] [>>] [Months] [Search] [eSubscribe] News Feed

plustek: 4830P Problem

Previous by date: 27 Feb 2003 21:19:17 -0000 Having trouble getting Plustek Opticpro 9630P scanner working under Mandrake 9.0, Revenant
Next by date: 27 Feb 2003 21:19:17 -0000 [canon lide 20] poor color quality, Florent BERANGER
Previous in thread:
Next in thread: 27 Feb 2003 21:19:17 -0000 Re: 4830P Problem, Jaeger, Gerhard
Subject: 4830P Problem
From: ####@####.#### (Robert Fendt)
Date: 27 Feb 2003 21:19:17 -0000
Message-Id: <29601179.546403A6.00218405@netscape.net> 
Hi,



some time ago I wrote to the list because I had problems with my Plustek OpticPro 4830P. Gerhard wrote to 



export SANE_DEBUG_PLUSEK=12 and to

scanimage ....



That's what I did and here is the output:


**********************************************************************


[sanei_debug] Setting debug level of plustek to 12.

[plustek] Plustek backend V0.44-10, part of sane-backends 1.0.9

[plustek] ># Plustek-SANE Backend configuration file<

[plustek] ># For use with Plustek parallel-port scanners and<

[plustek] ># LM9831/2/3 based USB scanners<

[plustek] >#<

[plustek] ># For parport devices use the parport section<

[plustek] >#<

[plustek] >[parport]<

[plustek] next device is a PARPORT device

[plustek] >device /dev/pt_drv<

[plustek] Decoding device name >/dev/pt_drv<

[plustek] ><

[plustek] >#<

[plustek] ># leave the default values as specified in /etc/modules.conf<

[plustek] >#<

[plustek] >option warmup    -1<

[plustek] Decoding option >warmup<

[plustek] >option lOffOnEnd -1<

[plustek] Decoding option >lOffOnEnd<

[plustek] >option lampOff   -1<

[plustek] Decoding option >lampOff<

[plustek] ><

[plustek] ><

[plustek] >#<

[plustek] ># The USB section:<

[plustek] ># each device needs at least two lines:<

[plustek] ># - [usb] vendor-ID and product-ID<

[plustek] ># - device devicename<

[plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<

[plustek] ># [usb] 0x07B3 0x0017<

[plustek] ># device /dev/usbscanner<

[plustek] >#<

[plustek] ># additionally you can specify some options<

[plustek] ># warmup, lOffOnEnd, lampOff<

[plustek] >#<

[plustek] ># For autodetection use<

[plustek] ># [usb]<

[plustek] ># device /dev/usbscanner<

[plustek] >#<

[plustek] ># NOTE: autodetection is safe, as it uses the info it got<

[plustek] >#       from the USB subsystem. If you're not using the<

[plustek] >#       autodetection, you MUST have attached that device<

[plustek] >#       at your USB-port, that you have specified...<

[plustek] >#<

[plustek] ><

[plustek] >[usb]<

[plustek] attach (/dev/pt_drv, 0xbfffd6cc, (nil))

[plustek] Device configuration:

[plustek] device name  : >/dev/pt_drv<

[plustek] porttype     : 0

[plustek] USB-ID       : ><

[plustek] warmup       : -1s

[plustek] lampOff      : -1

[plustek] lampOffOnEnd : -1

[plustek] skipCalibr.  : 0

[plustek] invertNegs.  : 0

[plustek] pos_x        : 0

[plustek] pos_y        : 0

[plustek] pos_shading_y: -1

[plustek] neg_x        : 0

[plustek] neg_y        : 0

[plustek] neg_shading_y: -1

[plustek] tpa_x        : 0

[plustek] tpa_y        : 0

[plustek] tpa_shading_y: -1

[plustek] red gain     : -1

[plustek] green gain   : -1

[plustek] blue gain    : -1

[plustek] red Gamma    : 1.00

[plustek] green Gamma  : 1.00

[plustek] blue Gamma   : 1.00

[plustek] gray Gamma   : 1.00

[plustek] ---------------------

[plustek] drvopen()

[plustek] open failed: -9021

[plustek] next device is a USB device (autodetection)

[plustek] next device is an USB device

[plustek] ><

[plustek] >#<

[plustek] ># options for the previous USB entry<

[plustek] >#<

[plustek] ># switch lamp off after xxx secs, 0 disables the feature<

[plustek] >option lampOff 0<

[plustek] Decoding option >lampOff<

[plustek] ><

[plustek] ># warmup period in seconds, 0 means no warmup<

[plustek] >option warmup 30<

[plustek] Decoding option >warmup<

[plustek] ><

[plustek] ># 0 means leave lamp-status untouched, not 0 means switch off<

[plustek] ># on sane_close<

[plustek] >option lOffOnEnd 0<

[plustek] Decoding option >lOffOnEnd<

[plustek] ><

[plustek] >#<

[plustek] ># options to tweak the image start-position<

[plustek] ># (WARNING: there's no internal range check!!!)<

[plustek] >#<

[plustek] ># for the normal scan area<

[plustek] >#<

[plustek] >option posOffX 0<

[plustek] Decoding option >posOffX<

[plustek] >option posOffY 0<

[plustek] Decoding option >posOffY<

[plustek] ><

[plustek] ># for transparencies<

[plustek] >option tpaOffX 0<

[plustek] Decoding option >tpaOffX<

[plustek] >option tpaOffY 0<

[plustek] Decoding option >tpaOffY<

[plustek] ><

[plustek] ># for negatives<

[plustek] >option negOffX 0<

[plustek] Decoding option >negOffX<

[plustek] >option negOffY 0<

[plustek] Decoding option >negOffY<

[plustek] ><

[plustek] >#<

[plustek] ># for setting the calibration strip position<

[plustek] ># (WARNING: there's no internal range check!!!)<

[plustek] ># -1 means use built in<

[plustek] >#<

[plustek] >option posShadingY -1<

[plustek] Decoding option >posShadingY<

[plustek] >option tpaShadingY -1<

[plustek] Decoding option >tpaShadingY<

[plustek] >option negShadingY -1<

[plustek] Decoding option >negShadingY<

[plustek] ><

[plustek] >#<

[plustek] ># to invert the negatives, 0 disables the feature<

[plustek] >#<

[plustek] >option invertNegatives 0<

[plustek] Decoding option >invertNegatives<

[plustek] ><

[plustek] ># for skipping calibration step<

[plustek] >option skipCalibration 0<

[plustek] Decoding option >skipCalibration<

[plustek] ><

[plustek] ># for replacing the gain values found during<

[plustek] ># calibration<

[plustek] >option red_gain   -1<

[plustek] Decoding option >red_gain<

[plustek] >option green_gain -1<

[plustek] Decoding option >green_gain<

[plustek] >option blue_gain  -1<

[plustek] Decoding option >blue_gain<

[plustek] ><

[plustek] >#<

[plustek] ># for adjusting the default gamma values<

[plustek] ># use values of 2.5 for CanoScan<

[plustek] >#<

[plustek] >option redGamma         1.0<

[plustek] Decoding option >redGamma<

[plustek] >option greenGamma       1.0<

[plustek] Decoding option >greenGamma<

[plustek] >option blueGamma        1.0<

[plustek] Decoding option >blueGamma<

[plustek] >option grayGamma        1.0<

[plustek] Decoding option >grayGamma<

[plustek] ><

[plustek] >#<

[plustek] ># to enable TPA (non Plustek devices only)<

[plustek] ># 0 means default behaviour as specified in the internal tables<

[plustek] ># 1 means enable<

[plustek] >#<

[plustek] >option enableTPA 0<

[plustek] Decoding option >enableTPA<

[plustek] ><

[plustek] >#<

[plustek] ># and of course the device-name<

[plustek] >#<

[plustek] >device /dev/usbscanner<

[plustek] Decoding device name >/dev/usbscanner<

[plustek] ><

[plustek] >#<

[plustek] ># to define a new device, start with a new section:<

[plustek] ># [usb] or [parport]<

[plustek] >#<

[plustek] attach (/dev/usbscanner, 0xbfffd6cc, (nil))

[plustek] Device configuration:

[plustek] device name  : >/dev/usbscanner<

[plustek] porttype     : 1

[plustek] USB-ID       : ><

[plustek] warmup       : 30s

[plustek] lampOff      : 0

[plustek] lampOffOnEnd : 0

[plustek] skipCalibr.  : 0

[plustek] invertNegs.  : 0

[plustek] pos_x        : 0

[plustek] pos_y        : 0

[plustek] pos_shading_y: -1

[plustek] neg_x        : 0

[plustek] neg_y        : 0

[plustek] neg_shading_y: -1

[plustek] tpa_x        : 0

[plustek] tpa_y        : 0

[plustek] tpa_shading_y: -1

[plustek] red gain     : -1

[plustek] green gain   : -1

[plustek] blue gain    : -1

[plustek] red Gamma    : 1.00

[plustek] green Gamma  : 1.00

[plustek] blue Gamma   : 1.00

[plustek] gray Gamma   : 1.00

[plustek] ---------------------

[plustek] drvopen()

[plustek] usbDev_open(/dev/usbscanner,)

[plustek] open failed: -1

[plustek] sane_open - /dev/pt_drv0

[plustek] attach (/dev/pt_drv0, 0xbfffe70c, 0xbfffe708)

[plustek] open failed: -1

[plustek] sane_open - /dev/pt_drv0

[plustek] attach (/dev/pt_drv0, 0xbfffe70c, 0xbfffe708)

[plustek] Device configuration:

[plustek] device name  : ><

[plustek] porttype     : 0

[plustek] USB-ID       : ><

[plustek] warmup       : 0s

[plustek] lampOff      : 0

[plustek] lampOffOnEnd : 0

[plustek] skipCalibr.  : 0

[plustek] invertNegs.  : 0

[plustek] pos_x        : 0

[plustek] pos_y        : 0

[plustek] pos_shading_y: 0

[plustek] neg_x        : 0

[plustek] neg_y        : 0

[plustek] neg_shading_y: 0

[plustek] tpa_x        : 0

[plustek] tpa_y        : 0

[plustek] tpa_shading_y: 0

[plustek] red gain     : 0

[plustek] green gain   : 0

[plustek] blue gain    : 0

[plustek] red Gamma    : 0.00

[plustek] green Gamma  : 0.00

[plustek] blue Gamma   : 0.00

[plustek] gray Gamma   : 0.00

[plustek] ---------------------

[plustek] drvopen()

[plustek] open: can't open /dev/pt_drv0 as a device

[plustek] open failed: -1

[plustek] attach (/dev/pt_drv0, 0xbfffe70c, 0xbfffe708)

[plustek] Device configuration:

[plustek] device name  : ><

[plustek] porttype     : 1

[plustek] USB-ID       : ><

[plustek] warmup       : 0s

[plustek] lampOff      : 0

[plustek] lampOffOnEnd : 0

[plustek] skipCalibr.  : 0

[plustek] invertNegs.  : 0

[plustek] pos_x        : 0

[plustek] pos_y        : 0

[plustek] pos_shading_y: 0

[plustek] neg_x        : 0

[plustek] neg_y        : 0

[plustek] neg_shading_y: 0

[plustek] tpa_x        : 0

[plustek] tpa_y        : 0

[plustek] tpa_shading_y: 0

[plustek] red gain     : 0

[plustek] green gain   : 0

[plustek] blue gain    : 0

[plustek] red Gamma    : 0.00

[plustek] green Gamma  : 0.00

[plustek] blue Gamma   : 0.00

[plustek] gray Gamma   : 0.00

[plustek] ---------------------

[plustek] drvopen()

[plustek] usbDev_open(/dev/pt_drv0,)

[plustek] open failed: -1

scanimage: open of device plustek:/dev/pt_drv0 failed: Error during device I/O

[plustek] sane_exit


*********************************************************************

Another thing that might help: sometimes the driver sees a 6000/6000P type scanner instead of the 4830P (??)

Thanks for helping,
Robert

__________________________________________________________________
The NEW Netscape 7.0 browser is now available. Upgrade now! http://channels.netscape.com/ns/browsers/download.jsp 

Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/
Previous by date: 27 Feb 2003 21:19:17 -0000 Having trouble getting Plustek Opticpro 9630P scanner working under Mandrake 9.0, Revenant
Next by date: 27 Feb 2003 21:19:17 -0000 [canon lide 20] poor color quality, Florent BERANGER
Previous in thread:
Next in thread: 27 Feb 2003 21:19:17 -0000 Re: 4830P Problem, Jaeger, Gerhard
[Lists] [Configure] [<<] [<] [by Thread] [by Date] [>] [>>] [Months] [Search] [eSubscribe] News Feed
Powered by ezmlm-browse 0.20.