plustek: problem with hotplug usb epson 1250 U photo
Subject:
Re: problem with hotplug usb epson 1250 U photo
From:
####@####.####
Date:
14 May 2004 16:04:45 +0100
Message-Id: <1084547082.40a4e00add538@imp5-q.free.fr>
Selon Gerhard Jaeger ####@####.####
> On Thursday 13 May 2004 09:13, Thomas Sechet wrote:
> > Hi,
> >
> > I try to configure my scanner "Epson 1250 U Photo" with sane-plustek
> driver
> > but it doesn't work. I have test the scanner with Windows and it works
> > well. I have take
> > a lot of time to try this configuration, with the help of other users on
> > irc freenode sane, but I don't understand what is wrong in my
> > configuration. I report you parameters of my configuration. I hope that it
> > will give you information of this problem. If you have some time to
> examine
> > my report, it is a pleasure for me to collect these informations.
> >
> Hi,
>
> please enabled the backends debug facility and provide the output, all
> other stuff seems to be fine, except probably the access rights of the
> scanner device, if this is the problem, you should check scanimage -L
> as root user.
> Try in each case:
> export SANE_DEBUG_PLUSTEK=20 ; scanimage -L
>
> Ciao,
> Gerhard
Hi,
Thank you for your answer and for your help.
Thomas
*************************************
Here is the output of scanimage -L as root
[sanei_debug] Setting debug level of plustek to 20.
[plustek] Plustek backend V0.47-11, part of sane-backends 1.0.14
[plustek] ># Plustek-SANE Backend configuration file<
[plustek] ># For use with LM9831/2/3 based USB scanners<
[plustek] >#<
[plustek] ><
[plustek] ># each device needs at least two lines:<
[plustek] ># - [usb] vendor-ID and product-ID<
[plustek] ># - device devicename<
[plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)<
[plustek] ># [usb] 0x07B3 0x0017<
[plustek] ># device /dev/usbscanner<
[plustek] ># or<
[plustek] ># device libusb:bbb:ddd<
[plustek] ># where bbb is the busnumber and ddd the device number<
[plustek] ># make sure that your user has access to /proc/bus/usb/bbb/ddd<
[plustek] >#<
[plustek] ># additionally you can specify some options<
[plustek] ># warmup, lOffOnEnd, lampOff<
[plustek] >#<
[plustek] ># For autodetection use<
[plustek] ># [usb]<
[plustek] ># device /dev/usbscanner<
[plustek] >#<
[plustek] ># or simply<
[plustek] ># [usb]<
[plustek] >#<
[plustek] ># or if you want a specific device but you have no idea about the<
[plustek] ># device node or you use libusb, simply set vendor- and product-ID<
[plustek] ># [usb] 0x07B3 0x0017<
[plustek] ># device auto<
[plustek] >#<
[plustek] ># NOTE: autodetection is safe, as it uses the info it got<
[plustek] ># from the USB subsystem. If you're not using the<
[plustek] ># autodetection, you MUST have attached that device<
[plustek] ># at your USB-port, that you have specified...<
[plustek] >#<
[plustek] ><
[plustek] >#[usb] 0x04b8 0x010f<
[plustek] >[usb] 04b8 010f<
[plustek] next device is a USB device (0x0004-0x0008)
[plustek] ... next device
[plustek] ><
[plustek] >#<
[plustek] ># options for the previous USB entry<
[plustek] >#<
[plustek] ># switch lamp off after xxx secs, 0 disables the feature<
[plustek] >option lampOff 300<
[plustek] Decoding option >lampOff<
[plustek] ><
[plustek] ># warmup period in seconds, 0 means no warmup<
[plustek] >option warmup 15<
[plustek] Decoding option >warmup<
[plustek] ><
[plustek] ># 0 means leave lamp-status untouched, not 0 means switch off<
[plustek] ># on sane_close<
[plustek] >option lOffOnEnd 1<
[plustek] Decoding option >lOffOnEnd<
[plustek] ><
[plustek] >#<
[plustek] ># options to tweak the image start-position<
[plustek] ># (WARNING: there's no internal range check!!!)<
[plustek] >#<
[plustek] ># for the normal scan area<
[plustek] >#<
[plustek] >option posOffX 0<
[plustek] Decoding option >posOffX<
[plustek] >option posOffY 0<
[plustek] Decoding option >posOffY<
[plustek] ><
[plustek] ># for transparencies<
[plustek] >option tpaOffX 0<
[plustek] Decoding option >tpaOffX<
[plustek] >option tpaOffY 0<
[plustek] Decoding option >tpaOffY<
[plustek] ><
[plustek] ># for negatives<
[plustek] >option negOffX 0<
[plustek] Decoding option >negOffX<
[plustek] >option negOffY 0<
[plustek] Decoding option >negOffY<
[plustek] ><
[plustek] >#<
[plustek] ># for setting the calibration strip position<
[plustek] ># (WARNING: there's no internal range check!!!)<
[plustek] ># -1 means use built in<
[plustek] >#<
[plustek] >option posShadingY -1<
[plustek] Decoding option >posShadingY<
[plustek] >option tpaShadingY -1<
[plustek] Decoding option >tpaShadingY<
[plustek] >option negShadingY -1<
[plustek] Decoding option >negShadingY<
[plustek] ><
[plustek] >#<
[plustek] ># to invert the negatives, 0 disables the feature<
[plustek] >#<
[plustek] >option invertNegatives 0<
[plustek] Decoding option >invertNegatives<
[plustek] ><
[plustek] >#<
[plustek] ># to save/restore coarse calibration data<
[plustek] >#<
[plustek] >option cacheCalData 0<
[plustek] Decoding option >cacheCalData<
[plustek] ><
[plustek] >#<
[plustek] ># use alternate calibration routines<
[plustek] >#<
[plustek] >option altCalibration 0<
[plustek] Decoding option >altCalibration<
[plustek] ><
[plustek] >#<
[plustek] ># for skipping whole calibration step<
[plustek] >#<
[plustek] >option skipCalibration 0<
[plustek] Decoding option >skipCalibration<
[plustek] ><
[plustek] >#<
[plustek] ># for skipping entire fine calibration step<
[plustek] ># coarse calibration is done<
[plustek] >#<
[plustek] >option skipFine 0<
[plustek] Decoding option >skipFine<
[plustek] ><
[plustek] >#<
[plustek] ># discard the result of the fine white calibration<
[plustek] >#<
[plustek] >option skipFineWhite 0<
[plustek] Decoding option >skipFineWhite<
[plustek] ><
[plustek] ># for replacing the gain values found during<
[plustek] ># calibration<
[plustek] >option red_gain -1<
[plustek] Decoding option >red_gain<
[plustek] >option green_gain -1<
[plustek] Decoding option >green_gain<
[plustek] >option blue_gain -1<
[plustek] Decoding option >blue_gain<
[plustek] ><
[plustek] >#<
[plustek] >#<
[plustek] >option red_lampoff -1<
[plustek] Decoding option >red_lampoff<
[plustek] >option green_lampoff -1<
[plustek] Decoding option >green_lampoff<
[plustek] >option blue_lampoff -1<
[plustek] Decoding option >blue_lampoff<
[plustek] ><
[plustek] >#<
[plustek] ># for adjusting the default gamma values<
[plustek] >#<
[plustek] >option redGamma 1.0<
[plustek] Decoding option >redGamma<
[plustek] >option greenGamma 1.0<
[plustek] Decoding option >greenGamma<
[plustek] >option blueGamma 1.0<
[plustek] Decoding option >blueGamma<
[plustek] >option grayGamma 1.0<
[plustek] Decoding option >grayGamma<
[plustek] ><
[plustek] >#<
[plustek] ># to enable TPA (non Plustek devices only)<
[plustek] ># 0 means default behaviour as specified in the internal tables<
[plustek] ># 1 means enable<
[plustek] >#<
[plustek] >option enableTPA 0<
[plustek] Decoding option >enableTPA<
[plustek] ><
[plustek] >#<
[plustek] ># model override functionality, currently only available for<
[plustek] ># Mustek devices, using NSCs' vendor ID: 0x0400 and<
[plustek] ># also their product ID: 0x1000 (LM9831) 0x1001 (LM9832)<
[plustek] >#<
[plustek] ># mov/PID | 0x1000 | 0x1001<
[plustek] ># ---------------------------------------<
[plustek] ># 0 (default)| BearPaw1200 | BearPaw 2400<
[plustek] ># 1 | ignored | BearPaw 1200<
[plustek] >#<
[plustek] >option mov 0<
[plustek] Decoding option >mov<
[plustek] ><
[plustek] >#<
[plustek] ># and of course the device-name<
[plustek] >#<
[plustek] ># device /dev/usbscanner<
[plustek] ># device auto<
[plustek] >device libusb:003:002<
[plustek] Decoding device name >libusb:003:002<
[plustek] >#<
[plustek] ># to define a new device, start with a new section:<
[plustek] ># [usb]<
[plustek] >#<
[plustek] attach (libusb:003:002, 0xbfffcb10, (nil))
[plustek] Device configuration:
[plustek] device name : >libusb:003:002<
[plustek] USB-ID : >0x0004-0x0008<
[plustek] model ovr. : 0
[plustek] warmup : 15s
[plustek] lampOff : 300
[plustek] lampOffOnEnd : yes
[plustek] cacheCalData : no
[plustek] altCalibrate : no
[plustek] skipCalibr. : no
[plustek] skipFine : no
[plustek] skipFineWhite: no
[plustek] invertNegs. : no
[plustek] pos_x : 0
[plustek] pos_y : 0
[plustek] pos_shading_y: -1
[plustek] neg_x : 0
[plustek] neg_y : 0
[plustek] neg_shading_y: -1
[plustek] tpa_x : 0
[plustek] tpa_y : 0
[plustek] tpa_shading_y: -1
[plustek] red gain : -1
[plustek] green gain : -1
[plustek] blue gain : -1
[plustek] red lampoff : -1
[plustek] green lampoff: -1
[plustek] blue lampoff : -1
[plustek] red Gamma : 1.00
[plustek] green Gamma : 1.00
[plustek] blue Gamma : 1.00
[plustek] gray Gamma : 1.00
[plustek] ---------------------
[plustek] usbDev_open(libusb:003:002,0x0004-0x0008)
comment : scanimage -L process break on this last line
***********************************