plustek: pt_drv doesnt' build any more
Subject:
Re: pt_drv doesnt' build any more
From:
Gerhard Jaeger ####@####.####
Date:
24 Jun 2004 07:55:29 +0100
Message-Id: <200406240854.51465.gerhard@gjaeger.de>
Hmmm,
I've seen one similar problem in another report, but only regarding the
versioning...
The unknown symbol stuff is new - but I'm pretty sure that there is
something wrong with the kernel configuration.
Just to be sure: Have you built the kernel on your own?
If not, then you should probably do this - to make sure, that the
configuration is okay - the missing symbols are quite strange, as
I think your kernel should have floating point support - are you sure,
that the kernel + it's configured source are installed correctly?
Ciao,
Gerhard
On Wednesday 23 June 2004 02:32, Arthur Pedyczak wrote:
> Hi,
> I have just upgraded my Suse 9.1 kernel (due to the known security issue).
> Current kernel version is 2.6.5-7.75 (Suse versioning).
>
> After upgrading the kernel, I have downloaded the latest snapshot of
> sane-backends (sane-backends-2004-06-22.tar.gz). I used the script
> MakeModule.sh to build the pt_drv module. The build completes with one
> warning :
>
> WARNING: Symbol version
> dump /usr/src/linux-2.6.5-7.75-obj/i386/smp/Module.symvers is missing,
> modules will have CONFIG
> _MODVERSIONS disabled
>
> The resulting module refuses to load:
>
> FATAL: Error inserting pt_drv
> (/lib/modules/2.6.5-7.75-smp/kernel/drivers/parport/pt_drv.ko): Unknown
> symbol in module,
> or unknown parameter (see dmesg)
>
>
> The output of dmesg is:
> pt_drv: unsupported module, tainting kernel.
> pt_drv: Unknown symbol __floatdidf
> pt_drv: Unknown symbol __gtdf2
> pt_drv: Unknown symbol __floatsidf
> pt_drv: Unknown symbol __ltdf2
> pt_drv: Unknown symbol __fixunsdfsi
> pt_drv: Unknown symbol __adddf3
> pt_drv: Unknown symbol __fixdfsi
> pt_drv: Unknown symbol __divdf3
> pt_drv: Unknown symbol __muldf3
> pt_drv: Unknown symbol __nedf2
> pt_drv: Unknown symbol __fixdfdi
> pt_drv: Unknown symbol __subdf3
>
>
> ====================================
> Any suggestions ?
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
