plustek: Plustek Optic Pro 4831P - No memory ! No scanner...
Subject:
Plustek Optic Pro 4831P - No memory ! No scanner...
From:
Gustavo Luiz Gomes ####@####.####
Date:
6 Aug 2005 19:27:53 +0100
Message-Id: <200508061527.20129.gustavo.luiz@click21.com.br>
Hi!
I have a Fedora Core 3 installed on a Abit VA-20 Motherboard with a Semprom
2200 processor. The sane-backend installed came from the
sane-backends-1.0.15-1.4.i386.rpm package.
I've already tested my parallel port with an Apollo printer. The parallel port
and the parport module seemed to work fine. The scanner also works fine on a
Windows machine.
I've tried changing to SPP mode and adding the "options parport_pc io=0x378
irq=none" to my /etc/modpobe.conf file... the lamp just turns up and will
never turn out no matter what i do...
Below is output i'm getting and it's is the same for EPP and SSP modes, except
for the "[plustek_pp] Setting EPP-mode" line:
[root@nemesis log]# scanimage -L
[sanei_debug] Setting debug level of plustek_pp to 120.
[plustek_pp] PlustekPP backend V0.43-5, part of sane-backends 1.0.15
[plustek_pp] ># Plustek-PP SANE Backend configuration file<
[plustek_pp] ># For use with Plustek parallel-port scanners<
[plustek_pp] >#<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># user either [direct] or [kernel] to access the scanner<
[plustek_pp] ># when using [kernel], device specifies the device-node, which
iscreated<
[plustek_pp] ># by the kernel-module loader (applies only to Linux)<
[plustek_pp] ># when using [direct], device is used to set the parallel-port
base address<
[plustek_pp] ># or a device-name suitable for libieee1284, i.e. parport0<
[plustek_pp] >#<
[plustek_pp] >#[direct]<
[plustek_pp] >#device 0x378<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># leave the default values as specified in /etc/modules.conf<
[plustek_pp] >#<
[plustek_pp] >#option warmup -1<
[plustek_pp] >#option lOffOnEnd -1<
[plustek_pp] >#option lampOff -1<
[plustek_pp] ><
[plustek_pp] ># model override switch, mostly for cosmetic changes, if the
autodetection<
[plustek_pp] ># does not work or could not work correctly<
[plustek_pp] >#option mov 7<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner via libieee1284<
[plustek_pp] >#<
[plustek_pp] ><
[plustek_pp] >[direct]<
[plustek_pp] >device parport0<
[plustek_pp] Decoding device name >parport0<
[plustek_pp] ><
[plustek_pp] >#<
[plustek_pp] ># example for accessing the scanner via the kernel module<
[plustek_pp] >#<
[plustek_pp] >#[kernel]<
[plustek_pp] >#device /dev/pt_drv<
[plustek_pp] >#<
[plustek_pp] >#option warmup -1<
[plustek_pp] >#option lOffOnEnd -1<
[plustek_pp] >#option lampOff -1<
[plustek_pp] attach (parport0, 0xbfefb8a0, (nil))
[plustek_pp] Device configuration:
[plustek_pp] device name : >parport0<
[plustek_pp] direct I/O : yes
[plustek_pp] warmup : -1s
[plustek_pp] lampOff : -1
[plustek_pp] lampOffOnEnd : yes
[plustek_pp] model override: 0
[plustek_pp] ---------------------
[plustek_pp] drvopen()
[plustek_pp] ptdrvInit(0)
[plustek_pp] Init settings done
[plustek_pp] ScanData = 0x0894b9c8
[plustek_pp] Assigning port handle 0
[plustek_pp] ptdrvOpen(port=0x0)
[plustek_pp] Try to claim the parport
[plustek_pp] Setting SPP-mode
[plustek_pp] Setting PS/2-mode
[plustek_pp] Setting EPP-mode
[plustek_pp] We're using libIEEE1284 I/O
[plustek_pp] Starting Scanner-Autodetection
[plustek_pp] ************ DETECTP48xx ************
[plustek_pp] ModelSet4800()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet4800() done.
[plustek_pp] P48xxInitAsic()
[plustek_pp] DacInitialize()
[plustek_pp] ImageInitialize()
[plustek_pp] IOFuncInitialize()
[plustek_pp] IOInitialize()
[plustek_pp] * using readfunction >fnEPPRead<
[plustek_pp] MotorInitialize()
[plustek_pp] ResetPort()
[plustek_pp] Test 0x55
[plustek_pp] Test 0xAA
[plustek_pp] Compare data=0x7e and status=0xe, port=0x0
[plustek_pp] p48xxReadWriteTest()
[plustek_pp] Found a 96003 ASIC at Reg 0x13
[plustek_pp] ModelSet4830()
[plustek_pp] modelInitPageSettings()
[plustek_pp] A4 set
[plustek_pp] ModelSet4830() done.
[plustek_pp] Moving 32 bytes to scanner, IODELAY = 0...
[plustek_pp] ... done.
[plustek_pp] p48xxDoTest()
[plustek_pp] Moving 2048 bytes to scanner, IODELAY = 0...
[plustek_pp] ... done.
[plustek_pp] Bank 0 overwritten
[plustek_pp] found 0 bytes of memory
[plustek_pp] No memory ! No scanner...
I've ran out of ideias on how to solve this problem... any directions would be
appreciated.
[ ]'s
--
Gustavo Luiz