plustek: insmod pt_drv problem
Subject:
Re: insmod pt_drv problem
From:
"Jaeger, Gerhard" ####@####.####
Date:
3 Nov 2001 11:01:52 -0000
Message-Id: <01110311572904.00701@ruebennase>
Can you please try the 0.39-3 version?
The scanner is identified, but the EPP trasnfers seems to fail while
checking the memory access... This should have been improved
in the latest versions...
Gerhard
On Friday, 2. November 2001 17:39, Roy Wood wrote:
> I'm trying to get a Plustek FBIVP (9630?) scanner working on my RedHat
> 7.1 box (kernel 2.4.2-2), and am having some trouble. I know the scanner
> works, since I've tested under Windows98.
>
> Building and installing pt_drv it was fine, but loading the module causes
> problems.
>
> First of all, I definitely have the parport/parport_pc modules loaded
> too, so that's not the problem.
>
> When I try to load the pt_drv module, either directly (insmod pt_drv) or
> via the "make load" in the pt_drv Makefile, I get this:
>
> /lib/modules/2.4.2-2/misc/pt_drv.o: init_module: Success
> Hint: insmod errors can be caused by incorrect module parameters,
> including invalid IO or IRQ parameters
>
> It doesn't help to specify that the port is 0x378 and the IRQ is 7
> either-- I tried. And yes, the parallel port is set to 0x378 and IRQ 7,
> EPP 1.9 mode. And yes, I've tried hinting pt_drv with "mov=1".
>
> I've enabled debug messages in pt_drv, and get the following, which is
> hopeful, since it indicates that pt_drv is finding the scanner ("Found a
> 96003 ASIC at Reg 0x13"), and the scanner light comes on.
