plustek: Thread: Scanimage findet meinen Plustek 9636T nicht

Hallo Liste,

ich habe einen Scanner von Plustek Modell 9636T. Auf meinem System(Redhat 7.3) 
habe ich plustek-sane-0_40_17.tar.gz installiert. Ich kann das Modul pt_drv 
laden, aber scanimage -L findet den Scanner nicht. Ich habe noch eine 
zusätzliche Schnittstellenkarte(0x378) an dieser ist der Drucker.

BIOS: Onboard Parallel Port 0x278 irq 5 für den Scanner

cat /etc/modules.conf
alias parport_lowlevel parport_pc
alias eth0 3c59x
alias eth1 3c59x
alias sound-slot-0 via82cxxx_audio
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 
2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 
|| :
alias usb-controller usb-uhci
alias char-major-40     pt_drv
post-install pt_drv modprobe -k parport
options pt_drv lampoff=180 warmup=15 port=0x278 lOffonEnd=0 mov=0

/sbin/lsmod
Module                  Size  Used by    Not tainted
nls_iso8859-1           3488   1  (autoclean)
nls_cp437               5120   1  (autoclean)
vfat                   12092   1  (autoclean)
fat                    37432   0  (autoclean) [vfat]
pt_drv                117952   0  (unused)
sg                     33476   0  (autoclean)
sr_mod                 16920   0  (autoclean)
via82cxxx_audio        20480   1  (autoclean)
uart401                 7936   0  (autoclean) [via82cxxx_audio]
ac97_codec             11936   0  (autoclean) [via82cxxx_audio]
sound                  71916   0  (autoclean) [via82cxxx_audio uart401]
soundcore               6692   4  (autoclean) [via82cxxx_audio sound]
binfmt_misc             7556   1
parport_pc             18724   3  (autoclean)
lp                      8864   0  (autoclean)
parport                34208   3  (autoclean) [pt_drv parport_pc lp]
autofs                 12132   0  (autoclean) (unused)
3c59x                  28424   1
ipchains               43528  14
ide-scsi                9664   0
scsi_mod              108608   3  [sg sr_mod ide-scsi]
ide-cd                 30272   0
cdrom                  32224   0  [sr_mod ide-cd]
usb-uhci               24452   0  (unused)
usbcore                73216   1  [usb-uhci]
ext3                   67136   2
jbd                    49400   2  [ext3]

scanimage -L

No scanners were identified...

scanimage -d plustek:/dev/pt_drv
scanimage: open of device plustek:/dev/pt_drv failed: Error during device I/O

Wieso wird der Scanner nicht erkannt?

Gruß

Udo Lütkemeier

Hi,

first of all, you should try and send english mails, so
everybody can contribute...
Then, as pt_drv is loaded, the scanner is recognized so
far. There are three possible things wrong:
- The driver version does not match the backend-version
- You don't have read/write access to /dev/pt_drv 
- /dev/pt_drv does not exist

Hope this helps
  Gerhard

The Plustek 9636T scanner works now. I had a version conflict between sane and 
the plustek-driver.

Udo