[<<] [<] Page 2 of 2 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Plustek driver
From: Sébastien ####@####.#### Date: 4 Jul 2002 23:10:25 -0000 Message-Id: <200207050050.30611.smiguet@iht.tu-darmstadt.de> Hi! I've got exactly the same problem, but with Linux Suse 8.0 . http://www.mostang.com/pipermail/sane-devel/2001-December/001759.html So, how did you solve it? I didn't find the answer to this previous link I've installed my scanner on Linux Suse 7.3; this was working, but now, it doesn't work anymore! (I removed all the old version of sane and xsane, but when I try to reinstall it, I've this problem too.) --------------------------------------------------- wgc231:/data1/Softwares/sane/sane-backends-1.0.8/backend/plustek_driver # make load /sbin/modprobe pt_drv || exit 1 Note: /etc/modules.conf is more recent than /lib/modules/2.4.18-4GB/modules.dep Note: /etc/modules.conf is more recent than /lib/modules/2.4.18-4GB/modules.dep /lib/modules/2.4.18-4GB/misc/pt_drv.o: init_module: Success Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.18-4GB/misc/pt_drv.o: insmod /lib/modules/2.4.18-4GB/misc/pt_drv.o failed /lib/modules/2.4.18-4GB/misc/pt_drv.o: insmod pt_drv failed make: *** [load] Error 1 -- __________________________ / ___ ___ _ _ \ | / __\ _ \ \/ | | | \__ \ __/ \/ | | | \___/___/_||_| | ####@####.#### | ICQ # 1047 00 968 | \__________________________/ + 49 61 51 16 44 72 (Büro) Institut für Halbleitertechnik (IHT) -- TU Darmstadt -- | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Plustek driver
From: "Jaeger, Gerhard" ####@####.#### Date: 5 Jul 2002 14:57:44 -0000 Message-Id: <17QUJN-2El67EC@fmrl05.sul.t-online.com> On Friday, 5. July 2002 00:56, Sébastien Miguet wrote: > Hi! > > I've got exactly the same problem, > but with Linux Suse 8.0 . > > http://www.mostang.com/pipermail/sane-devel/2001-December/001759.html > > So, how did you solve it? > I didn't find the answer to this previous link > > I've installed my scanner on Linux Suse 7.3; this was working, > but now, it doesn't work anymore! > (I removed all the old version of sane and xsane, > but when I try to reinstall it, I've this problem too.) > > --------------------------------------------------- > wgc231:/data1/Softwares/sane/sane-backends-1.0.8/backend/plustek_driver # > make load > /sbin/modprobe pt_drv || exit 1 > Note: /etc/modules.conf is more recent than > /lib/modules/2.4.18-4GB/modules.dep > Note: /etc/modules.conf is more recent than > /lib/modules/2.4.18-4GB/modules.dep > /lib/modules/2.4.18-4GB/misc/pt_drv.o: init_module: Success > Hint: insmod errors can be caused by incorrect module parameters, including > invalid IO or IRQ parameters > /lib/modules/2.4.18-4GB/misc/pt_drv.o: insmod > /lib/modules/2.4.18-4GB/misc/pt_drv.o failed > /lib/modules/2.4.18-4GB/misc/pt_drv.o: insmod pt_drv failed > make: *** [load] Error 1 Hi, according to the mail you refer to, I sent Dave the following advice: >Dave the problem seems to be, that your scanner isn't recognized! >I that case, the driver won't be loaded. >sane-find-scanner won't work with parallel-port devices, it only >address usb and scsi devices. >You might enable the debug messages in the driver >(uncomment the line debug=y in the Makefile) then load again >and send the output of dmesg to the list! >What else can you do: >You can play around with the BIOS settings, make sure to have EPP >or if that doesn't work SPP enabled. >You might need to disable the IEEE1284 functionality of hte parport >module in the kernel configuration, as this sometimes interferes with >the ASIC inside the Plustek scanner... The general advice here is to disable ECP mode in BIOS! Hope this helps again Gerhard ------------------------- gerhard AT gjaeger DOT de | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Plustek driver
From: Tim Flagg ####@####.#### Date: 12 Aug 2002 23:43:38 -0000 Message-Id: <Pine.LNX.4.44.0208121624460.28999-100000@summer.flaggzone.com> Hi, The plustek linux driver for the Epson 1250 is very helpful so I can use the scanner without firing up the microsoft box. Whew. I noticed one small error that could cause problems with other people trying to install it. In the "Plustek-USB.txt" file it tells the user to put the vendor and product id into the /etc/modules.conf file and lists the vendor and product id as: EPSON ===== Vendor ID: 0x048 Product ID Device-description and status 0x010F EPSON Perfection 1250/Photo - mostly working But the Vendor ID is actually "0x4b8", not "0x048" The above is from the file: plustek-sane-0_42_9.tar.gz. Anyway, thanks for making this available! Tim | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: Plustek driver
From: "Jaeger, Gerhard" ####@####.#### Date: 13 Aug 2002 07:42:44 -0000 Message-Id: <17eW5i-0YBq1gC@fmrl07.sul.t-online.com> Thank you for this report, I'll fix it Gerhard On Tuesday, 13. August 2002 01:29, Tim Flagg wrote: > Hi, > > The plustek linux driver for the Epson 1250 is very helpful so I can > use the scanner without firing up the microsoft box. Whew. > > I noticed one small error that could cause problems with other people > trying to install it. In the "Plustek-USB.txt" file it tells > the user to put the vendor and product id into the /etc/modules.conf > file and lists the vendor and product id as: > > EPSON > ===== > Vendor ID: 0x048 > > Product ID Device-description and status > 0x010F EPSON Perfection 1250/Photo - mostly working > > But the Vendor ID is actually "0x4b8", not "0x048" > > The above is from the file: > plustek-sane-0_42_9.tar.gz. > > Anyway, thanks for making this available! > > Tim | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
plustek driver
From: "David Nelson" ####@####.#### Date: 18 Sep 2003 22:43:41 -0000 Message-Id: <Law11-F59pPFR6sKBEr00009b1a@hotmail.com> Hello, I am not currently using linux, but I plan to install very soon. One of my major concerns is my scanner, a CanoScan N656U, will not work correctly. I had RedHat Linux 8.0 Installed a while a go with SANE and I downloaded the plustek driver. My computer could not get any response from the scanner. Is there something I'm doing wrong? Or, is there a website I could view, helping me configure the plustek driver? Also, I am pretty new to linux but I know simple commands like ./Configure, I have installed a few things before. Any help appreciated! Thanks, Dave F Nelson _________________________________________________________________ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 2 of 2 [>] [>>] |