| [<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Subject:
HP2200C problems
From: "Mike George" ####@####.#### Date: 8 Oct 2002 01:22:17 -0000 Message-Id: <200210072119.AA533725416@mail.georgetech.com> Hello,
I have been trying to get my HP 2200C working. I cannot get sane to recognize its existance. I'm currently using a stock redhat 7.2 installation (with the RPMS of sane and sane-backends 1.0.8 that come with ximian).
The scanner does show up in /proc/bus/usb/devices. I'm not sure whether I should be using /dev/usbscanner0 or /dev/usb/scanner0 in /etc/sane.d/plustek.conf, but I get the same response with both, which is that it fails to find the scanner. The following is a subset of the output of "strace scanimage -L":
open ("/etc/sane.d/plustek.conf", O_RDONLY) = 3
...
close (3)
open ("/dev/pt_drv", O_RDONLY) = -1
...
open ("/dev/usb/scanner0", O_RDWR) = 3
ioctl (3, 0x80045220, 0xbfffd148) = -1 ENOTTY (Inappropriate ioctl for device)
ioctl (3, 0x800475a0, 0xbfffd148) = -1 ENOTTY (Inappropriate ioctl for device)
ioctl (3, 0x80045521, 0xbfffd144) = -1 ENOTTY (Inappropriate ioctl for device)
ioctl (3, 0x800475a1, 0xbfffd144) = -1 ENOTTY (Inappropriate ioctl for device)
close(3)
...
It then proceeds to query the other drivers, and quits with a message that no scanners were found.
Any help or advice you can give would be appreciated.
Sincerely,
Mike George
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Subject:
Re: HP2200C problems
From: "Jaeger, Gerhard" ####@####.#### Date: 8 Oct 2002 16:14:36 -0000 Message-Id: <17ywx1-1vmzwGC@fmrl01.sul.t-online.com> Hi Mike,
this all looks to me that the kernel you are running will not support
the scanner...
What version is it?
Gerhard
On Tuesday, 8. October 2002 03:19, Mike George wrote:
> Hello,
>
> I have been trying to get my HP 2200C working. I cannot get sane to
> recognize its existance. I'm currently using a stock redhat 7.2
> installation (with the RPMS of sane and sane-backends 1.0.8 that come with
> ximian).
>
> The scanner does show up in /proc/bus/usb/devices. I'm not sure whether I
> should be using /dev/usbscanner0 or /dev/usb/scanner0 in
> /etc/sane.d/plustek.conf, but I get the same response with both, which is
> that it fails to find the scanner. The following is a subset of the output
> of "strace scanimage -L":
>
> open ("/etc/sane.d/plustek.conf", O_RDONLY) = 3
> ...
> close (3)
> open ("/dev/pt_drv", O_RDONLY) = -1
> ...
> open ("/dev/usb/scanner0", O_RDWR) = 3
> ioctl (3, 0x80045220, 0xbfffd148) = -1 ENOTTY (Inappropriate ioctl for
> device) ioctl (3, 0x800475a0, 0xbfffd148) = -1 ENOTTY (Inappropriate ioctl
> for device) ioctl (3, 0x80045521, 0xbfffd144) = -1 ENOTTY (Inappropriate
> ioctl for device) ioctl (3, 0x800475a1, 0xbfffd144) = -1 ENOTTY
> (Inappropriate ioctl for device) close(3)
> ...
>
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| [<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||