[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
USB scanner troubles
From: "Michael D. Spiceland" ####@####.#### Date: 18 Nov 2002 04:09:44 -0000 Message-Id: <1037592256.27484.11.camel@fuzzymonkey.etowns.net> Fellow plustek users/developers, I am trying to install a HP ScanJet 2100C USB which is listed as "mostly working". I REALLY am desperate to get this working! The problem: scanimage -L lists nothing and either does sane-find-scanner. :-( I am using Mandrake 9.0 with the rpm's for libsane and sane-backends versions 1.0.8 installed. Additionally, I've installed the latest plustek-module-0_42_9.tar.gz module. I downloaded the sane backend and ran make all;make install from within the plustek directory. Everything seemed to install flawlessly. When I do a cat /proc/usb/devices, it shows the vender and product ID identical to what is shown on the chart as "mostly working" so I believe this should work. After installing, I added the exact vender and product ID to my /etc/modules.conf and did modprobe scanner. /var/log/messages says: Nov 17 22:54:29 fuzzymonkey kernel: usb.c: registered new driver usbscanner Nov 17 22:54:29 fuzzymonkey kernel: scanner.c: 0.4.6:USB Scanner Driver and lsmod says: scanner 9140 0 (unused) Does anyone know what I can do from here? I don't know how to troubleshoot further :-( Thanks, Michael | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: USB scanner troubles
From: Gerhard Jaeger ####@####.#### Date: 18 Nov 2002 08:42:54 -0000 Message-Id: <200211180938.37164.gerhard@gjaeger.de> Hi, the problem is the Mandrake stuff, they have removed all backends from the SANE configuration file dll.conf. Search for this file, it should be loacted at: /etc/sane.d or /usr/local/etc/sane.d (Try: locate dll.conf) Once found, check at least for the plustek entry, if there's a leading # remove it...) This should do the trick Gerhard On Montag, 18. November 2002 05:04, Michael D. Spiceland wrote: > Fellow plustek users/developers, > > I am trying to install a HP ScanJet 2100C USB which is listed as "mostly > working". I REALLY am desperate to get this working! > > The problem: scanimage -L lists nothing and either does > sane-find-scanner. :-( > > I am using Mandrake 9.0 with the rpm's for libsane and sane-backends > versions 1.0.8 installed. Additionally, I've installed the latest > plustek-module-0_42_9.tar.gz module. I downloaded the sane backend and > ran make all;make install from within the plustek directory. Everything > seemed to install flawlessly. When I do a cat /proc/usb/devices, it > shows the vender and product ID identical to what is shown on the chart > as "mostly working" so I believe this should work. > > After installing, I added the exact vender and product ID to my > /etc/modules.conf and did modprobe scanner. /var/log/messages says: > > Nov 17 22:54:29 fuzzymonkey kernel: usb.c: registered new driver > usbscanner > Nov 17 22:54:29 fuzzymonkey kernel: scanner.c: 0.4.6:USB Scanner Driver > > and lsmod says: > scanner 9140 0 (unused) > > Does anyone know what I can do from here? I don't know how to > troubleshoot further :-( > > Thanks, > Michael | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: USB scanner troubles
From: "Karl F. Larsen" ####@####.#### Date: 18 Nov 2002 12:40:44 -0000 Message-Id: <Pine.LNX.4.44.0211180531130.1181-100000@Bucket.dog> Hi Michael, here is my paper on USB scanners. Hope it helps. Recipe for Setting Up a Scanner using USB Karl Larsen November 17, 2002 If the scanner you have has a USB cable that plugs into the computer, and if your computer has a plug for it to plug into, this paper will tell you how to make certain that the software called Sane on your Linux operating system can find and use your scanner. First your Linux. It should have at least a 2.4.8 kernel and among other things should have the scanner module compiled and ready for use. Next your Sane. You should have a recent version of this software. To find out what you have, run this simple test. In an Xterm window type scanimage --version. This will print out the backend version and it needs to be 1.0.7 or higher to work well with a USB scanner. If your version is older you need to install the latest version from In terms of the Red Hat Linux, version 7.3 or higher will fully support running a USB scanner. An earlier version might require both a kernel and Sane upgrade. Plug your scanner into the computer and turn it on. Notice the Name of your scanner and it's model number. Now in an Xterm window at the command line do this: cat /proc/bus/usb/devices <Enter> This lists all the data about your USB ports. Here is a copy of my computer's setup: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=6400 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS= 8 #Cfgs= 1 P: Vendor=04b8 ProdID=010f Rev= 1.00 S: Manufacturer=EPSON S: Product=EPSON Scanner 010F C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=16ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I have an Epson model Perfection 1250 scanner and you can see that this printout is correct for an Epson. Notice at the second P: is listed a number called Vender=04b8 which means Epson. ProdID=010f which means model Perfection 1250 are the 2 numbers we need to set up Sane so it can find the scanner. The numbers need to be changed to exact Hex numbers so instead of 04b8 it is written 0x04b8 and 010f is written 0x010f. We will use these numbers with the scanner module to set up a working scanner. It's assumed you have scanner as a module on your Linux. To load the module with the scanner numbers in place we use modprobe and we must be in an xterm window as root. To do this type su - and when it asks for your password type that in. You will see the prompt turn to # and you will be in the /root directory. Now type in the following: modprobe scanner vendor=0x04b8 product=0x010f but instead of my numbers put in your scanners numbers. It should take a second to do it's job and then stop without any error messages. If you get an error message you didn't type it in right. Now to see if Sane can find the scanner. For this we use the tool that comes with Sane called "sane-find-scanner". In an xterm window type in: sane-find-scanner My Linux came back with this: # Note that sane-find-scanner will find any scanner that is connected # to a SCSI bus and some scanners that are connected to the Universal # Serial Bus (USB) depending on your OS. It will even find scanners # that are not supported at all by SANE. It won't find a scanner that # is connected to a parallel or proprietary port. sane-find-scanner: found USB scanner (vendor = 0x04b8, product = 0x010f) at device /dev/usb/scanner0 Notice the last 2 lines that begin "sane-find-scanner:". It says Sane has found our scanner because it gives the proper vendor and product numbers for my scanner. At this point your scanner will probably not work yet but your sure that Sane can find your scanner. Your more than 1/2 toward a working scanner in Linux. To use the scanner you will want to load the module scanner each time you turn on your Linux. There are several ways to do this but the most straight forward way is to load scanner from the file /etc/rc.d/rc.local. This file on my computer looks like this: #!/bin/sh # # This script will be executed *after* all the other init scripts. # You can put your own initialization stuff in here if you don't # want to do the full Sys V style init stuff. touch /var/lock/subsys/local # This turns on the scanner module with the Epson scanner insmod scanner >/dev/null It's the insmod scanner that loads the module. Now we want to load the vendor and product numbers. This is done in the file /etc/modules.conf. Mine looks like this: alias parport_lowlevel parport_pc alias eth0 8139too alias sound-slot-0 es1371 post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || : pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || : alias usb-controller usb-uhci options scanner vendor=0x4b8 product=0x010f Notice the last line which is what I added. To make that line active as root you need to use a tool that reads the file and does what it says to do. This tool is called "depmod" and you use it this way: #depmod -a It will take several seconds and then just stop. Testing the setup is easy and takes little time. Remove the scanner module from the kernel with rmmod scanner. Then run sane-find-scanner and see it can't find it. Then use modprobe scanner to re-load it and again run sane-find-scanner and observe it again finds it. At this point your ready to approach which back end to use with your scanner. On 17 Nov 2002, Michael D. Spiceland wrote: > Fellow plustek users/developers, > > I am trying to install a HP ScanJet 2100C USB which is listed as "mostly > working". I REALLY am desperate to get this working! > > The problem: scanimage -L lists nothing and either does > sane-find-scanner. :-( > > I am using Mandrake 9.0 with the rpm's for libsane and sane-backends > versions 1.0.8 installed. Additionally, I've installed the latest > plustek-module-0_42_9.tar.gz module. I downloaded the sane backend and > ran make all;make install from within the plustek directory. Everything > seemed to install flawlessly. When I do a cat /proc/usb/devices, it > shows the vender and product ID identical to what is shown on the chart > as "mostly working" so I believe this should work. > > After installing, I added the exact vender and product ID to my > /etc/modules.conf and did modprobe scanner. /var/log/messages says: > > Nov 17 22:54:29 fuzzymonkey kernel: usb.c: registered new driver > usbscanner > Nov 17 22:54:29 fuzzymonkey kernel: scanner.c: 0.4.6:USB Scanner Driver > > and lsmod says: > scanner 9140 0 (unused) > > Does anyone know what I can do from here? I don't know how to > troubleshoot further :-( > > Thanks, > Michael > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: ####@####.#### > For additional commands, e-mail: ####@####.#### > > > -- - Karl Larsen k5di Las Cruces,NM Az ScQRPions - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: USB scanner troubles
From: Gerhard Jaeger ####@####.#### Date: 18 Nov 2002 12:43:24 -0000 Message-Id: <200211181339.07752.gerhard@gjaeger.de> Karl, may I put this description onto the Plustek backend site? Gerhard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: USB scanner troubles
From: "Karl F. Larsen" ####@####.#### Date: 18 Nov 2002 13:50:00 -0000 Message-Id: <Pine.LNX.4.44.0211180640490.1568-100000@Bucket.dog> Hi Gerhard you sure can. I wrote this to help others trying to get their scanner working. I'm fixing some small so far errors and will send you the finished copy when it's finished...:-) On Mon, 18 Nov 2002, Gerhard Jaeger wrote: > Karl, > > may I put this description onto the Plustek backend site? > > Gerhard > > -- - Karl Larsen k5di Las Cruces,NM Az ScQRPions - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: USB scanner troubles
From: "Michael D. Spiceland" ####@####.#### Date: 18 Nov 2002 17:37:24 -0000 Message-Id: <1037640714.7858.26.camel@fuzzymonkey.etowns.net> On Mon, 2002-11-18 at 03:38, Gerhard Jaeger wrote: > Once found, check at least for the plustek entry, if there's a leading # > remove it...) > > This should do the trick > Gerhard I edited the dll.conf with a line that said plustek. Before I edited it, it just had net and umax_pp. Now it has those three entries one per line. I think the issue may be at the driver/usb level. I do not have a /dev/usbcanner or a /dev/usb/scanner :-( /proc/bus/usb/devices says lists my scanner with vender and product ID. I issue these to modprobe and it doesn't give any warnings and /var/log/messages doesn't complain. I've done this with and without the scanner plugged in. No matter what I do, when I plug in my scanner /var/log/messages shows: Nov 18 12:29:15 fuzzymonkey kernel: hub.c: USB new device connect on bus1/1, assigned device number 11 Nov 18 12:29:15 fuzzymonkey kernel: scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product - 3f0:10f Nov 18 12:29:15 fuzzymonkey kernel: usb.c: USB device 11 (vend/prod 0x3f0/0x505) is not claimed by any active driver. Nov 18 12:29:19 fuzzymonkey /etc/hotplug/usb.agent: ... no modules for USB product 3f0/505/100 This makes me believe that even though I am loading the driver with the exact vendor and product ID, that it still isn't associating it with it. [root@fuzzymonkey mike]# lsmod | grep scanner scanner 9140 0 (unused) usbcore 58304 1 [scanner hid usbmouse usb-uhci] Where can I go from here? What can I do to further troubleshoot it? Is adding the plustek line to dll.conf sufficient for configuring sane? I assume that I need to get the usb stuff to register that driver with my scanner first before I need to worry about sane working. Thank you in advance, Michael | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: USB scanner troubles
From: "Michael D. Spiceland" ####@####.#### Date: 18 Nov 2002 17:43:08 -0000 Message-Id: <1037641057.7859.30.camel@fuzzymonkey.etowns.net> sane-find-scanner now works, but still problems! The only thing I changed was passing it the vender and product using modules.conf instead of on command line, but sane-find-scanner now works! sane-find-scanner: found USB scanner (vendor = 0x03f0, product = 0x0505) at device /dev/usb/scanner0 The problem is that scanimage -L doesn't find it: [root@fuzzymonkey mike]# scanimage -L [umax_pp_low] TestVersion(0) (umax_pp_low.c:4412) failed ... No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Is this due to an incorrectly setup dll.conf as you said? I put plustek on that file ... is there somethign else I should do? Thanks, Michael | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: USB scanner troubles
From: "Jaeger, Gerhard" ####@####.#### Date: 18 Nov 2002 19:20:23 -0000 Message-Id: <18DrMM-1hVHPMC@fmrl06.sul.t-online.com> Hi Michael, remove the umax_pp entry, and edit plustek.conf that way, that device points to /dev/usb/scanner0. Also make sure to have read/write access to this device from your user account... Gerhard BTW: no need to send the mails twice, the mailing list is enough ;-) On Monday, 18. November 2002 18:37, Michael D. Spiceland wrote: > sane-find-scanner now works, but still problems! The only thing I > changed was passing it the vender and product using modules.conf > instead of on command line, but sane-find-scanner now works! > > sane-find-scanner: found USB scanner (vendor = 0x03f0, product = 0x0505) > at device /dev/usb/scanner0 > > The problem is that scanimage -L doesn't find it: > > [root@fuzzymonkey mike]# scanimage -L > [umax_pp_low] TestVersion(0) (umax_pp_low.c:4412) failed ... > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > > Is this due to an incorrectly setup dll.conf as you said? I put plustek > on that file ... is there somethign else I should do? > > Thanks, > Michael > | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
USB scanner troubles
From: Morel Fabrice ####@####.#### Date: 11 Mar 2003 01:38:06 -0000 Message-Id: <200303110223.42843.fabrice.morel9@free.fr> Hello, I think i have followed all the instructions but it's always the same problem: No scanners were identified! In dll.conf, i've just let the plustek and the net entries. These are the logs: [root@localhost fab]# cat /proc/bus/usb/devices ... P: Vendor=03f0 ProdID=0605 Rev= 1.00 S: Manufacturer=Hewlett-Packard S: Product=HP ScanJet 2200C C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usbscanner" "[root@localhost fab]# modprobe -v scanner vendor=0x03F0 product=0x0605 /sbin/insmod /lib/modules/2.4.19-16mdk/kernel/drivers/usb/scanner.o.gz vendor=0x03F0 product=0x0605" "[root@localhost fab]# /usr/local/bin/sane-find-scanner # No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. found USB scanner (vendor=0x03f0, product=0x0605) at /dev/usb/scanner0 found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0605 [HP ScanJet 2200C]) at libusb:001:002 # A USB device was detected. This program can't be sure if it's really # a scanner. If it is your scanner, it may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Scanners connected to the parallel port or other proprietary ports can't be # detected by this program." "[root@localhost fab]# /usr/local/bin/scanimage -L No scanners were identified. If you w...." "sanei_debug] Setting debug level of dll to 12. [dll] sane_init: SANE dll backend version 1.0.6 from sane-backends-1.0.9 [dll] add_backend: adding backend `net' [dll] add_backend: adding backend `plustek' [dll] load: searching backend `plustek' in `/usr/local/lib/sane' [dll] load: trying to load `/usr/local/lib/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/local/lib/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [sanei_debug] Setting debug level of plustek to 12. [plustek] Plustek backend V0.44-10, part of sane-backends 1.0.9 [plustek] ># Plustek-SANE Backend configuration file< [plustek] ># For use with Plustek parallel-port scanners and< [plustek] ># LM9831/2/3 based USB scanners< [plustek] >#< [plustek] ># For parport devices use the parport section< [plustek] >#< [plustek] ># [parport]< [plustek] ># device /dev/pt_drv< [plustek] >< [plustek] >#< [plustek] ># leave the default values as specified in /etc/modules.conf< [plustek] >#< [plustek] >#option warmup -1< [plustek] >#option lOffOnEnd -1< [plustek] >#option lampOff -1< [plustek] >< [plustek] >< [plustek] >#< [plustek] ># The USB section:< [plustek] ># each device needs at least two lines:< [plustek] ># - [usb] vendor-ID and product-ID< [plustek] ># - device devicename< [plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device /dev/usbscanner< [plustek] >#< [plustek] ># additionally you can specify some options< [plustek] ># warmup, lOffOnEnd, lampOff< [plustek] >#< [plustek] ># For autodetection use< [plustek] >[usb] 0x03f0 0x0605< [plustek] next device is a USB device (0x03F0-0x0605) [plustek] next device is an USB device [plustek] >device /dev/usb/scanner0< [plustek] Decoding device name >/dev/usb/scanner0< [pl.... [plustek] drvopen() [plustek] usbDev_open(/dev/usb/scanner0,0x03F0-0x0605) [plustek] Vendor ID=0x03F0, Product ID=0x0605 [plustek] usbio_DetectLM983x [plustek] UIO error [plustek] This is not a LM9831 or LM9832 chip based scanner. [plustek] open failed: -1 [dll] init: backend `plustek' is version 1.0.0 [plustek] sane_get_devices (0xbffff068, 0) No scanners were identified. If you w..." On Mandrake 9. Thanks if you could help me | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: USB scanner troubles
From: Gerhard Jaeger ####@####.#### Date: 12 Mar 2003 07:16:24 -0000 Message-Id: <200303120805.20253.gerhard@gjaeger.de> Hi, on certain kernels we ave this problem. It helps to replug the scanner after boot-up sequence... You might also either use libusb or scanner-module, not both. To use lubusb with the backend, update to SANE-1.0.11 and then change your plustek.conf that way, that it contains at least [usb] device auto Gerhard On Dienstag, 11. März 2003 02:23, Morel Fabrice wrote: > Hello, > I think i have followed all the instructions but it's always the same > problem: No scanners were identified! > In dll.conf, i've just let the plustek and the net entries. > These are the logs: > > > [root@localhost fab]# cat /proc/bus/usb/devices > ... > P: Vendor=03f0 ProdID=0605 Rev= 1.00 > S: Manufacturer=Hewlett-Packard > S: Product=HP ScanJet 2200C > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usbscanner" > > > > "[root@localhost fab]# modprobe -v scanner vendor=0x03F0 product=0x0605 > /sbin/insmod /lib/modules/2.4.19-16mdk/kernel/drivers/usb/scanner.o.gz > vendor=0x03F0 product=0x0605" > > > > "[root@localhost fab]# /usr/local/bin/sane-find-scanner > # No SCSI scanners found. If you expected something different, make sure > that > # you have loaded a SCSI driver for your SCSI adapter. > > found USB scanner (vendor=0x03f0, product=0x0605) at /dev/usb/scanner0 > found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0605 [HP > ScanJet 2200C]) at libusb:001:002 > # A USB device was detected. This program can't be sure if it's really > # a scanner. If it is your scanner, it may or may not be supported by > # SANE. Try scanimage -L and read the backend's manpage. > # Scanners connected to the parallel port or other proprietary ports > can't be > # detected by this program." > > > > "[root@localhost fab]# /usr/local/bin/scanimage -L > No scanners were identified. If you w...." > > > "sanei_debug] Setting debug level of dll to 12. > [dll] sane_init: SANE dll backend version 1.0.6 from sane-backends-1.0.9 > [dll] add_backend: adding backend `net' > [dll] add_backend: adding backend `plustek' > [dll] load: searching backend `plustek' in `/usr/local/lib/sane' > [dll] load: trying to load `/usr/local/lib/sane/libsane-plustek.so.1' > [dll] load: dlopen()ing `/usr/local/lib/sane/libsane-plustek.so.1' > [dll] init: initializing backend `plustek' > [sanei_debug] Setting debug level of plustek to 12. > [plustek] Plustek backend V0.44-10, part of sane-backends 1.0.9 > [plustek] ># Plustek-SANE Backend configuration file< > [plustek] ># For use with Plustek parallel-port scanners and< > [plustek] ># LM9831/2/3 based USB scanners< > [plustek] >#< > [plustek] ># For parport devices use the parport section< > [plustek] >#< > [plustek] ># [parport]< > [plustek] ># device /dev/pt_drv< > [plustek] >< > [plustek] >#< > [plustek] ># leave the default values as specified in /etc/modules.conf< > [plustek] >#< > [plustek] >#option warmup -1< > [plustek] >#option lOffOnEnd -1< > [plustek] >#option lampOff -1< > [plustek] >< > [plustek] >< > [plustek] >#< > [plustek] ># The USB section:< > [plustek] ># each device needs at least two lines:< > [plustek] ># - [usb] vendor-ID and product-ID< > [plustek] ># - device devicename< > [plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)< > [plustek] ># [usb] 0x07B3 0x0017< > [plustek] ># device /dev/usbscanner< > [plustek] >#< > [plustek] ># additionally you can specify some options< > [plustek] ># warmup, lOffOnEnd, lampOff< > [plustek] >#< > [plustek] ># For autodetection use< > [plustek] >[usb] 0x03f0 0x0605< > [plustek] next device is a USB device (0x03F0-0x0605) > [plustek] next device is an USB device > [plustek] >device /dev/usb/scanner0< > [plustek] Decoding device name >/dev/usb/scanner0< > [pl.... > [plustek] drvopen() > [plustek] usbDev_open(/dev/usb/scanner0,0x03F0-0x0605) > [plustek] Vendor ID=0x03F0, Product ID=0x0605 > [plustek] usbio_DetectLM983x > [plustek] UIO error > [plustek] This is not a LM9831 or LM9832 chip based scanner. > [plustek] open failed: -1 > [dll] init: backend `plustek' is version 1.0.0 > [plustek] sane_get_devices (0xbffff068, 0) > > No scanners were identified. If you w..." > > On Mandrake 9. > Thanks if you could help me > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: ####@####.#### > For additional commands, e-mail: ####@####.#### | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |