[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Plustek Optic Pro 4831P - No memory ! No scanner...
From: Gustavo Luiz Gomes ####@####.#### Date: 6 Aug 2005 19:27:53 +0100 Message-Id: <200508061527.20129.gustavo.luiz@click21.com.br> Hi! I have a Fedora Core 3 installed on a Abit VA-20 Motherboard with a Semprom 2200 processor. The sane-backend installed came from the sane-backends-1.0.15-1.4.i386.rpm package. I've already tested my parallel port with an Apollo printer. The parallel port and the parport module seemed to work fine. The scanner also works fine on a Windows machine. I've tried changing to SPP mode and adding the "options parport_pc io=0x378 irq=none" to my /etc/modpobe.conf file... the lamp just turns up and will never turn out no matter what i do... Below is output i'm getting and it's is the same for EPP and SSP modes, except for the "[plustek_pp] Setting EPP-mode" line: [root@nemesis log]# scanimage -L [sanei_debug] Setting debug level of plustek_pp to 120. [plustek_pp] PlustekPP backend V0.43-5, part of sane-backends 1.0.15 [plustek_pp] ># Plustek-PP SANE Backend configuration file< [plustek_pp] ># For use with Plustek parallel-port scanners< [plustek_pp] >#< [plustek_pp] >< [plustek_pp] >#< [plustek_pp] ># user either [direct] or [kernel] to access the scanner< [plustek_pp] ># when using [kernel], device specifies the device-node, which iscreated< [plustek_pp] ># by the kernel-module loader (applies only to Linux)< [plustek_pp] ># when using [direct], device is used to set the parallel-port base address< [plustek_pp] ># or a device-name suitable for libieee1284, i.e. parport0< [plustek_pp] >#< [plustek_pp] >#[direct]< [plustek_pp] >#device 0x378< [plustek_pp] >< [plustek_pp] >#< [plustek_pp] ># leave the default values as specified in /etc/modules.conf< [plustek_pp] >#< [plustek_pp] >#option warmup -1< [plustek_pp] >#option lOffOnEnd -1< [plustek_pp] >#option lampOff -1< [plustek_pp] >< [plustek_pp] ># model override switch, mostly for cosmetic changes, if the autodetection< [plustek_pp] ># does not work or could not work correctly< [plustek_pp] >#option mov 7< [plustek_pp] >< [plustek_pp] >#< [plustek_pp] ># example for accessing the scanner via libieee1284< [plustek_pp] >#< [plustek_pp] >< [plustek_pp] >[direct]< [plustek_pp] >device parport0< [plustek_pp] Decoding device name >parport0< [plustek_pp] >< [plustek_pp] >#< [plustek_pp] ># example for accessing the scanner via the kernel module< [plustek_pp] >#< [plustek_pp] >#[kernel]< [plustek_pp] >#device /dev/pt_drv< [plustek_pp] >#< [plustek_pp] >#option warmup -1< [plustek_pp] >#option lOffOnEnd -1< [plustek_pp] >#option lampOff -1< [plustek_pp] attach (parport0, 0xbfefb8a0, (nil)) [plustek_pp] Device configuration: [plustek_pp] device name : >parport0< [plustek_pp] direct I/O : yes [plustek_pp] warmup : -1s [plustek_pp] lampOff : -1 [plustek_pp] lampOffOnEnd : yes [plustek_pp] model override: 0 [plustek_pp] --------------------- [plustek_pp] drvopen() [plustek_pp] ptdrvInit(0) [plustek_pp] Init settings done [plustek_pp] ScanData = 0x0894b9c8 [plustek_pp] Assigning port handle 0 [plustek_pp] ptdrvOpen(port=0x0) [plustek_pp] Try to claim the parport [plustek_pp] Setting SPP-mode [plustek_pp] Setting PS/2-mode [plustek_pp] Setting EPP-mode [plustek_pp] We're using libIEEE1284 I/O [plustek_pp] Starting Scanner-Autodetection [plustek_pp] ************ DETECTP48xx ************ [plustek_pp] ModelSet4800() [plustek_pp] modelInitPageSettings() [plustek_pp] A4 set [plustek_pp] ModelSet4800() done. [plustek_pp] P48xxInitAsic() [plustek_pp] DacInitialize() [plustek_pp] ImageInitialize() [plustek_pp] IOFuncInitialize() [plustek_pp] IOInitialize() [plustek_pp] * using readfunction >fnEPPRead< [plustek_pp] MotorInitialize() [plustek_pp] ResetPort() [plustek_pp] Test 0x55 [plustek_pp] Test 0xAA [plustek_pp] Compare data=0x7e and status=0xe, port=0x0 [plustek_pp] p48xxReadWriteTest() [plustek_pp] Found a 96003 ASIC at Reg 0x13 [plustek_pp] ModelSet4830() [plustek_pp] modelInitPageSettings() [plustek_pp] A4 set [plustek_pp] ModelSet4830() done. [plustek_pp] Moving 32 bytes to scanner, IODELAY = 0... [plustek_pp] ... done. [plustek_pp] p48xxDoTest() [plustek_pp] Moving 2048 bytes to scanner, IODELAY = 0... [plustek_pp] ... done. [plustek_pp] Bank 0 overwritten [plustek_pp] found 0 bytes of memory [plustek_pp] No memory ! No scanner... I've ran out of ideias on how to solve this problem... any directions would be appreciated. [ ]'s -- Gustavo Luiz | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |