[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
OptikPro 4800 on Ubuntu 7.04
From: Beate und Gregor Koch ####@####.#### Date: 22 May 2007 21:10:23 +0100 Message-Id: <1179864419.7206.9.camel@aragorn> Hey, I have an OpticPro 8400 parport scanner on Ubuntu 7.04 64 bit. Xsane and scanimage are detekting the scanner korrect. When I scan, then goes the Lamp out after the warming time, and the scan starts. Most time I get then an IO-Error. libsane 1.0.18 xsane 0.99 Have somone an Idea? Thanks Gregor | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: OptikPro 4800 on Ubuntu 7.04
From: Gerhard Jaeger ####@####.#### Date: 24 May 2007 06:35:48 +0100 Message-Id: <200705240734.16763.gerhard@gjaeger.de> On Dienstag, 22. Mai 2007, Beate und Gregor Koch wrote: > Hey, > I have an OpticPro 8400 parport scanner on Ubuntu 7.04 64 bit. > Xsane and scanimage are detekting the scanner korrect. When I scan, then > goes the Lamp out after the warming time, and the scan starts. Most time > I get then an IO-Error. > libsane 1.0.18 > xsane 0.99 > In the end it is a timing problem :( You might should try and compile the backend as kernel-module which should work better. While scanning, what is the output if you enable the debug-messages? i.e.: export SANE_PLUSTEK_PP_DEBUG=25 ; xsane - Gerhard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: OptikPro 4800 on Ubuntu 7.04
From: Beate und Gregor Koch ####@####.#### Date: 24 May 2007 19:50:32 +0100 Message-Id: <1180032599.5573.3.camel@aragorn> Am Donnerstag, den 24.05.2007, 07:34 +0200 schrieb Gerhard Jaeger: > On Dienstag, 22. Mai 2007, Beate und Gregor Koch wrote: > > Hey, > > I have an OpticPro 8400 parport scanner on Ubuntu 7.04 64 bit. > > Xsane and scanimage are detekting the scanner korrect. When I scan, then > > goes the Lamp out after the warming time, and the scan starts. Most time > > I get then an IO-Error. > > libsane 1.0.18 > > xsane 0.99 > > > In the end it is a timing problem :( You might should try and compile > the backend as kernel-module which should work better. > > While scanning, what is the output if you enable the debug-messages? > i.e.: export SANE_PLUSTEK_PP_DEBUG=25 ; xsane > > - Gerhard > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: ####@####.#### > For additional commands, e-mail: ####@####.#### > Hey Gerhard, I tryed to build the module, and get this: ####@####.#### sudo ./MakeModule.sh Password: This script will try and build a suitable kernel-module for your system. If you'd like to make the module WITH debug output, restart this script with as follows: ./MakeModule.sh DEBUG=y Press <ENTER> to continue or <CTRL><C> to cancel. Check for root - done. Check for kernelversion: Using makefile for kernel 2.6.x Build-directory: /tmp/sane-backends-1.0.18/doc/plustek/build Removing build-directory - done. Creating build-directory - done. Linking source files - done. Copying Makefile to build-directory - done. Making the module... make: Gehe in Verzeichnis '/usr/src/linux-headers-2.6.20-15-generic' CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_dac.o CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_detect.o CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_genericio.o CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_image.o CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_map.o CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_misc.o CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_models.o CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_io.o CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_procfs.o CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_motor.o CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_p9636.o CC [M] /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.o /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:178: Fehler: expected »)« before string constant /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:181: Fehler: expected »)« before string constant /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:184: Fehler: expected »)« before string constant /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:187: Fehler: expected »)« before string constant /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:190: Fehler: expected »)« before string constant /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:193: Fehler: expected »)« before string constant /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c:196: Fehler: expected »)« before string constant make[1]: *** [/tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.o] Fehler 1 make: *** [_module_/tmp/sane-backends-1.0.18/doc/plustek/build] Fehler 2 make: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.20-15-generic' There were some build errors... ####@####.#### gedit /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c ####@####.#### Whats wrong? Thanks Gregor | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: OptikPro 4800 on Ubuntu 7.04
From: Gerhard Jaeger ####@####.#### Date: 25 May 2007 06:13:40 +0100 Message-Id: <200705250713.36590.gerhard@gjaeger.de> On Donnerstag, 24. Mai 2007, Beate und Gregor Koch wrote: [SNIPSNAP] > make: *** [_module_/tmp/sane-backends-1.0.18/doc/plustek/build] Fehler 2 > make: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.20-15-generic' > There were some build errors... > ####@####.#### > gedit /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c > ####@####.#### > > > Whats wrong? > Moin, sorry for that issue - just checked the CVS logs and saw, that this has been fixed, but only in CVS. You need to download i.e. the latest snapshot from sane-project.org and use that stuff. There should be no need to reinstall all, simply building the kernel-module out of the CVS sources. Sorry for that, Gerhard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: OptikPro 4800 on Ubuntu 7.04
From: Beate und Gregor Koch ####@####.#### Date: 26 May 2007 12:11:30 +0100 Message-Id: <1180177890.7566.6.camel@aragorn> Am Freitag, den 25.05.2007, 07:13 +0200 schrieb Gerhard Jaeger: > On Donnerstag, 24. Mai 2007, Beate und Gregor Koch wrote: > [SNIPSNAP] > > make: *** [_module_/tmp/sane-backends-1.0.18/doc/plustek/build] Fehler 2 > > make: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.20-15-generic' > > There were some build errors... > > ####@####.#### > > gedit /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c > > ####@####.#### > > > > > > Whats wrong? > > > Moin, > > sorry for that issue - just checked the CVS logs and saw, that this > has been fixed, but only in CVS. You need to download i.e. the latest > snapshot from sane-project.org and use that stuff. There should be > no need to reinstall all, simply building the kernel-module out of > the CVS sources. > > Sorry for that, > Gerhard > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: ####@####.#### > For additional commands, e-mail: ####@####.#### > Hi Gerhard I could build the module now. There are no erros until the module should be load: Should I try and load the module? If this step fails, check the kernel-log. Press <ENTER> to continue or <CTRL><C> to cancel. make: Gehe in Verzeichnis '/tmp/sane-backends/doc/plustek/build' /sbin/modprobe pt_drv || exit 1 rm -f /dev/pt_drv* mknod: fehlender Operand nach „0“ „mknod --help“ gibt weitere Informationen. mknod: fehlender Operand nach „0“ „mknod --help“ gibt weitere Informationen. mknod: fehlender Operand nach „1“ „mknod --help“ gibt weitere Informationen. mknod: fehlender Operand nach „2“ „mknod --help“ gibt weitere Informationen. mknod: fehlender Operand nach „3“ „mknod --help“ gibt weitere Informationen. chgrp: Zugriff auf „/dev/pt_drv*“ nicht möglich: No such file or directory chmod: Zugriff auf „/dev/pt_drv*“ nicht möglich: No such file or directory make: *** [load] Fehler 1 make: Verlasse Verzeichnis '/tmp/sane-backends/doc/plustek/build' done. Should I remove the build directory? Press <ENTER> to continue or <CTRL><C> to cancel. Thanks for help Gregor | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: OptikPro 4800 on Ubuntu 7.04
From: Gerhard Jaeger ####@####.#### Date: 28 May 2007 13:02:12 +0100 Message-Id: <200705281411.12013.gerhard@gjaeger.de> On Samstag, 26. Mai 2007, Beate und Gregor Koch wrote: > Am Freitag, den 25.05.2007, 07:13 +0200 schrieb Gerhard Jaeger: > > On Donnerstag, 24. Mai 2007, Beate und Gregor Koch wrote: > > [SNIPSNAP] > > > > > make: *** [_module_/tmp/sane-backends-1.0.18/doc/plustek/build] Fehler > > > 2 make: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.20-15-generic' > > > There were some build errors... > > > ####@####.#### > > > gedit /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c > > > ####@####.#### > > > > > > > > > Whats wrong? > > > > Moin, > > > > sorry for that issue - just checked the CVS logs and saw, that this > > has been fixed, but only in CVS. You need to download i.e. the latest > > snapshot from sane-project.org and use that stuff. There should be > > no need to reinstall all, simply building the kernel-module out of > > the CVS sources. > > > > Sorry for that, > > Gerhard > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: ####@####.#### > > For additional commands, e-mail: ####@####.#### > > Hi Gerhard > I could build the module now. > There are no erros until the module should be load: > > Should I try and load the module? > If this step fails, check the kernel-log. > Press <ENTER> to continue or <CTRL><C> to cancel. > > make: Gehe in Verzeichnis '/tmp/sane-backends/doc/plustek/build' > /sbin/modprobe pt_drv || exit 1 > rm -f /dev/pt_drv* > mknod: fehlender Operand nach „0“ > „mknod --help“ gibt weitere Informationen. Hi, hmm, I wonder if the module gets loaded or not. What about the kernel log? (dmesg). Could try and do: modprobe pt_drv and then lsmod? The other stuff could be done "by hand" ... Gerhard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: OptikPro 4800 on Ubuntu 7.04
From: Beate und Gregor Koch ####@####.#### Date: 28 May 2007 18:40:39 +0100 Message-Id: <1180374018.5662.3.camel@aragorn> Am Montag, den 28.05.2007, 14:11 +0200 schrieb Gerhard Jaeger: > On Samstag, 26. Mai 2007, Beate und Gregor Koch wrote: > > Am Freitag, den 25.05.2007, 07:13 +0200 schrieb Gerhard Jaeger: > > > On Donnerstag, 24. Mai 2007, Beate und Gregor Koch wrote: > > > [SNIPSNAP] > > > > > > > make: *** [_module_/tmp/sane-backends-1.0.18/doc/plustek/build] Fehler > > > > 2 make: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.20-15-generic' > > > > There were some build errors... > > > > ####@####.#### > > > > gedit /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c > > > > ####@####.#### > > > > > > > > > > > > Whats wrong? > > > > > > Moin, > > > > > > sorry for that issue - just checked the CVS logs and saw, that this > > > has been fixed, but only in CVS. You need to download i.e. the latest > > > snapshot from sane-project.org and use that stuff. There should be > > > no need to reinstall all, simply building the kernel-module out of > > > the CVS sources. > > > > > > Sorry for that, > > > Gerhard > > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: ####@####.#### > > > For additional commands, e-mail: ####@####.#### > > > > Hi Gerhard > > I could build the module now. > > There are no erros until the module should be load: > > > > Should I try and load the module? > > If this step fails, check the kernel-log. > > Press <ENTER> to continue or <CTRL><C> to cancel. > > > > make: Gehe in Verzeichnis '/tmp/sane-backends/doc/plustek/build' > > /sbin/modprobe pt_drv || exit 1 > > rm -f /dev/pt_drv* > > mknod: fehlender Operand nach „0“ > > „mknod --help“ gibt weitere Informationen. > > Hi, > > hmm, I wonder if the module gets loaded or not. What about the > kernel log? (dmesg). Could try and do: modprobe pt_drv and then > lsmod? > The other stuff could be done "by hand" ... > > Gerhard > > --------------------------------------------------------------------- > To unsubscribe, e-mail: ####@####.#### > For additional commands, e-mail: ####@####.#### > Hi Gerhard there no entires in dmesg. Here the output from modprobe and lsmod root@aragorn:/home/gregor/downloads/sane-backends/doc/plustek# modprobe pt_drv root@aragorn:/home/gregor/downloads/sane-backends/doc/plustek# lsmod Module Size Used by binfmt_misc 14604 1 vmnet 44832 13 vmmon 149644 0 ppdev 11272 0 cpufreq_stats 8416 0 cpufreq_powersave 3072 0 cpufreq_ondemand 10640 0 cpufreq_userspace 6176 0 cpufreq_conservative 9736 0 freq_table 6336 2 cpufreq_stats,cpufreq_ondemand ppp_generic 32672 0 slhc 8320 1 ppp_generic sg 40616 0 sd_mod 25092 0 af_packet 27020 2 nls_utf8 3456 1 ntfs 101960 1 ext2 72464 1 lp 15048 0 fuse 51888 0 snd_cmipci 43168 1 gameport 18704 1 snd_cmipci snd_pcm_oss 49536 0 snd_mixer_oss 19840 1 snd_pcm_oss snd_pcm 92808 2 snd_cmipci,snd_pcm_oss snd_page_alloc 11792 1 snd_pcm snd_opl3_lib 13312 1 snd_cmipci snd_hwdep 12168 1 snd_opl3_lib snd_mpu401_uart 10752 1 snd_cmipci snd_seq_dummy 5380 0 snd_seq_oss 36608 0 joydev 12928 0 usb_storage 80448 0 xpad 11272 0 snd_seq_midi 11008 0 snd_rawmidi 29696 2 snd_mpu401_uart,snd_seq_midi snd_seq_midi_event 9856 2 snd_seq_oss,snd_seq_midi snd_seq 61856 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 26632 3 snd_pcm,snd_opl3_lib,snd_seq snd_seq_device 10260 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 68904 14 snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device parport_pc 40104 1 parport 43404 3 ppdev,lp,parport_pc pcspkr 4736 0 psmouse 43536 0 libusual 22184 1 usb_storage usbhid 29088 0 hid 34048 1 usbhid serio_raw 9092 0 soundcore 10272 1 snd k8temp 7552 0 nvidia 5659736 22 i2c_viapro 11544 0 i2c_core 26496 2 nvidia,i2c_viapro via_agp 13056 0 shpchp 37404 0 pci_hotplug 36228 1 shpchp ipv6 307456 12 tsdev 10112 0 evdev 13056 1 ext3 143760 3 jbd 68208 1 ext3 mbcache 11400 2 ext2,ext3 ide_disk 18304 8 ide_cd 35104 0 cdrom 40744 1 ide_cd ata_generic 10628 0 generic 6532 0 [permanent] floppy 67944 0 via_rhine 28168 0 mii 7424 1 via_rhine ehci_hcd 37004 0 uhci_hcd 28320 0 usbcore 154416 7 usb_storage,xpad,libusual,usbhid,ehci_hcd,uhci_hcd via82cxxx 11012 0 [permanent] ahci 25348 0 libata 137000 2 ata_generic,ahci scsi_mod 166968 4 sg,sd_mod,usb_storage,libata thermal 16912 0 processor 34952 1 thermal fan 6536 0 fbcon 44416 0 tileblit 4096 1 fbcon font 9856 1 fbcon bitblit 7296 1 fbcon softcursor 3712 1 bitblit vesafb 10376 0 cfbcopyarea 5120 1 vesafb cfbimgblt 4096 1 vesafb cfbfillrect 5632 1 vesafb capability 7048 0 commoncap 9472 1 capability root@aragorn:/home/gregor/downloads/sane-backends/doc/plustek# Gregor | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: OptikPro 4800 on Ubuntu 7.04
From: Gerhard Jaeger ####@####.#### Date: 11 Jun 2007 08:11:53 +0100 Message-Id: <200706110911.47401.gerhard@gjaeger.de> On Montag, 28. Mai 2007, Beate und Gregor Koch wrote: [SNIPSNAP] > Hi Gerhard > there no entires in dmesg. > Here the output from modprobe and lsmod > > root@aragorn:/home/gregor/downloads/sane-backends/doc/plustek# modprobe > pt_drv > > root@aragorn:/home/gregor/downloads/sane-backends/doc/plustek# lsmod > Module Size Used by [SNIPSNAP] > ppdev 11272 0 > parport_pc 40104 1 > parport 43404 3 ppdev,lp,parport_pc Hi Gregor, sorry for the late response, I did some tests, and it seems that the code lacks of some support for kernels > 2.6.15 - sorry. I'll try and fix that ASAP - keep you posted. Gerhard | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |