primax: Primax Colorado D9600
Subject:
Primax Colorado D9600
From:
Miletics Tamas ####@####.####
Date:
16 Jun 1999 19:21:28 -0000
Message-Id: <Pine.LNX.4.10.9906162107290.5603-100000@r2.euroweb.hu>
Hello !
I tried use the v0.2 program, and I am not happy.
I have linux 2.2.9 (static lp) and a colorado direct 9600 whit these chips
: GM71c4263cj60 (9815) and eicio93900 (9836e).
Windows drivers :
...
-rwxr-xr-x 1 root root 14167 Mar 31 15:13 vpmx2d.vxd*
-rwxr-xr-x 1 root root 148992 Apr 3 03:42 viceo.dll*
-rwxr-xr-x 1 root root 8628 May 23 17:16 twain.gid*
-rwxr-xr-x 1 root root 8901 Jun 13 17:57 Hardware.ini*
-rwxr-xr-x 1 root root 160 Jun 13 17:58 config.dat*
./primax_scan --verbose=99 --dim=1x1 --res=300 --lamp=on
parse_options:
debug level: 0x99
dimension: 1.0x1.0 inch
resolution: 300 dpi
lamp: on
dimension: 300x300 pixel
parse_options: switching lamp
epp_on:
Probing port 0378
SPP port present
EPP 1.9 with hardware direction protocol
wakeup: done
timeout: 81 -- we are in trouble
timeout: 81 -- we are in trouble
timeout: 81 -- we are in trouble
timeout: 81 -- we are in trouble
:-(
Scanner did not switch to EPP mode.....not compatible?
timeout: 81 -- we are in trouble
timeout: 81 -- we are in trouble
..
timeout: 81 -- we are in trouble
timeout: 81 -- we are in trouble
init_timer: 929559413.569846 s wait until: 929559413769846
timeout: 81 -- we are in trouble
...
timeout: 81 -- we are in trouble
power_sequence: failed - TIMEOUT
init_timer: 929559413.575014 s wait until: 929559428575014
epp_off:
Miletics Tamas
------------------------------------------------------------------------
===== EuroWeb Rt ===== Thomas Miletics - System Administrator
===== ===== H-1122 Budapest Varosmajor utca 13.
===== http://www.euroweb.hu ===== Tel.: +36 1 2244000 Fax: +36 1 2244100
------------------------------------------------------------------------
On Wed, 16 Jun 1999, Christian Ordig wrote:
>
> On 15-Jun-99 Christoph Adomeit wrote:
> > Hmm,
> >
> > my D600 doesn't say anything, even after changing the above
> > lines. The Problem might even be with my kernel/ or hardware
> > setup. I enabled SPP/EPP in my Bios, but when I run
> > primax_scan -lon I receive the following message:
> >
> > parse_options:
> > lamp: on
> > dimension: 0x 0 pixel
> > parse_options: switching lamp
> > Probing port 0378
> > SPP port present
> > PS/2 bidirectional port present
> > EPP 1.9 with hardware direction protocol
> >
> >:-(
> > Scanner did not switch to EPP mode.....not compatible?
> >
> > Any ideas what I can try ? What modules besides parport
> > should be loaded ? BTW: I still run a 2.1.132 kernel on
> > this machine....
> >
> Well,
>
> I had some problems with my printer, when I compiled the parport stuff as
> module.... (Kernel 2.2.x). I didn´t try the scanner with this config, but when
> I compiled the parport stuff directly into the kernel the printer works (and
> the scanner also... ;-)
>
> Not sure if this helps...
>
> But I think the really significant difference between you and Colin is the
> Windows95 driver... (I think your D600 driver is named vpmxd2.vxd, isn´t it?)
>
> Marco found out that there are quite large differencies between the vpmxd and
> the vpmxd2 driver... Perhaps Colin´s scanner is named D600, but is not an
> original one.
>
> Knowing the IC types would help us very much!
>
> Thank you.
>
>
> ---
> Christian Ordig | The Primax Scanner Driver Project for Linux/UN*X |
> Germany | http://thor.prohosting.com/~chrordig/Primax/ |
> __ _ | |
> / / (_)__ __ ____ __ | Why Linux? Because it is free, stable, and |
> / /__/ / _ \/ // /\ \/ / | bugs can be fixed in source opposed to waiting |
> /____/_/_//_/\_,_/ /_/\_\ | for a stable WinTendo from Micro$oft. |
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>