[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
pxscan-0.2
From: Gustaf Kroling ####@####.#### Date: 17 May 2000 21:25:50 -0000 Message-Id: <3922FF34.FE527365@swipnet.se> Hello all, There is now a new version of the driver for D9600 and others. Find it at http://home2.swipnet.se/~w-25069/pxscan.html Major changes are: The printer is allowed in after a scan so you don't ahve to turn off the power to the scanner... The resolution can be set in the interval 2 to 300 dpi. The driver tests on scanner model and ASIC type. Lots of unused code removed and some comments added. Thats all folks Gustaf | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: pxscan-0.2
From: Michael Seiwert ####@####.#### Date: 27 May 2000 07:28:15 -0000 Message-Id: <200005270624.IAA08759@tux.home> Hi, this is output from pxscan-0.2 workin with my D600/36bit: [root@tux pxscan-0.2]# ./pxscan -lon parse_options: lamp: on dimension: 0x 0 pixel parse_options: switching lamp Probing port 0378 SPP port present PS/2 bidirectional port present EPP 1.9 with hardware direction protocol ASIC: 08 scanner model reg= 8 :-( Scanner did not switch to EPP mode.....not compatible? port_ctrl= C4 Maybe anybody could help me to debug !!! Thanks Michael | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Re: pxscan-0.2
From: Christian Ordig ####@####.#### Date: 27 May 2000 14:57:01 -0000 Message-Id: <20000527164057.C491@thor.chris.com> On Sat, May 27, 2000 at 02:31:00PM +0000, Michael Seiwert wrote: > Hi, > > this is output from pxscan-0.2 workin with my D600/36bit: > > > [root@tux pxscan-0.2]# ./pxscan -lon > parse_options: > lamp: on > dimension: 0x 0 pixel > parse_options: switching lamp > Probing port 0378 > SPP port present > PS/2 bidirectional port present > EPP 1.9 with hardware direction protocol > > ASIC: 08 > scanner model reg= 8 > > :-( > Scanner did not switch to EPP mode.....not compatible? > port_ctrl= C4 Your ASIC is not a E1/E3... and so it's not supported by this driver. have you tried primax-scan 0.93? If both don't work it'd be interesting to know which ASIC and ADC are in your scanner... cu. -- Christian Ordig | Homepage: http://thor.prohosting.com/~chrordig/ Germany | eMail: Christian Ordig ####@####.#### [Content type application/pgp-signature not shown. Download] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |