primax: Thread: CAN NOT IDENTIFY THE SCANNER CODE 04

Hello:

I've Primax Colorado D600 with FCC-ID=EMJFB308C, Model is FB601C.
CENTRAL ASIC = EICI072100
OTHER ASIC = EICI080300
ADL = LM9811
MEMORY = EK681024J-15
LINEBUFER = 7K16HC224
MOTOR = 62003F

I think no supported it's true?
thanks.

On Sun, Sep 09, 2001 at 05:00:21PM +0200, Elías Parejo wrote:
have a look at your CAPS-LOCK key  ... seems it's broken (Subject line) !

> I've Primax Colorado D600 with FCC-ID=EMJFB308C, Model is FB601C.
> CENTRAL ASIC = EICI072100
> OTHER ASIC = EICI080300
> ADL = LM9811
> MEMORY = EK681024J-15
> LINEBUFER = 7K16HC224
> MOTOR = 62003F
> 
where the hell have I put my magic glass sphere? Or have you found any 
hint in your message which driver you tried to use?

-- 
Christian Ordig, Germany    | Homepage: http://thor.prohosting.com/~chrordig/

open(IN,"distris.txt")||die("Keine Distris, Du Affe!");while(<IN>){chomp;
print "$_??? hätte ich was besseres erwartet!!! naja,was solls...\n";}
close(IN);

Sorry but the code no is 04, is 0e and the driver I used is 0.93beta3
and pxscan-0.3pre3.
Thanks.

> On Sun, Sep 09, 2001 at 05:00:21PM +0200, Elías Parejo wrote:
> have a look at your CAPS-LOCK key  ... seems it's broken (Subject line) !
> 
> > I've Primax Colorado D600 with FCC-ID=EMJFB308C, Model is FB601C.
> > CENTRAL ASIC = EICI072100
> > OTHER ASIC = EICI080300
> > ADL = LM9811
> > MEMORY = EK681024J-15
> > LINEBUFER = 7K16HC224
> > MOTOR = 62003F
> > 
> where the hell have I put my magic glass sphere? Or have you found any 
> hint in your message which driver you tried to use?
> 
> -- 
> Christian Ordig, Germany    | Homepage: http://thor.prohosting.com/~chrordig/
> 
> open(IN,"distris.txt")||die("Keine Distris, Du Affe!");while(<IN>){chomp;
> print "$_??? hätte ich was besseres erwartet!!! naja,was solls...\n";}
> close(IN);

On Sun, Sep 09, 2001 at 08:27:55PM +0200, Elías Parejo wrote:
> Sorry but the code no is 04, is 0e and the driver I used is 0.93beta3
have you tried adding this number to the section where the scanner type
is recognized?

If it works (don't forget to use the 600dpi switch in primax_scan)
tell it to us, so I can  add this model to the official driver.


> pxscan-0.3pre3.
this won't work. it is for the D9600 (and maybe other 36Bit scanners)

Well the error code no appear now, but when I do $primax_scan-l on, the
lamp goes on. Then I do $primax_scan -S 600 -d 1x2 -R -f pepe, the
scanner do anything.
Thanks for all.
> On Sun, Sep 09, 2001 at 08:27:55PM +0200, Elías Parejo wrote:
> > Sorry but the code no is 04, is 0e and the driver I used is 0.93beta3
> have you tried adding this number to the section where the scanner type
> is recognized?
> 
> If it works (don't forget to use the 600dpi switch in primax_scan)
> tell it to us, so I can  add this model to the official driver.
> 
> 
> > pxscan-0.3pre3.
> this won't work. it is for the D9600 (and maybe other 36Bit scanners)
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>