[<<] [<] Page 1 of 1 [>] [>>] | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Subject:
Distorted Image with pxscan and Primax Colorado 9600 Direct
From: Alexandre Grings ####@####.#### Date: 1 Jun 2003 20:09:53 -0000 Message-Id: <1054496880.2044.185.camel@localhost.localdomain> Hi, I believe my scanner is a Primax Colorado 9600 Direct. Trying to make it work with the pxscan driver the results were: 1) pxscan can turn the lamp on and off. 2) It finishes scanning but the resulting image has color inversion (black page, white letters) and is distorted (scratched like \ ) . 3) Sometimes the moving part appears to be jammed and makes an horrible noise. 4) Sometimes I get the message "timeout bit didn't reset, status=97". I searched the archive for previous problems and haven't found any similar. What's the mater? Is the scanner? Is the driver? Is my terrible English?;) Thanks in advance, Alexandre Grings ______________________ Here is additional information: Model FB318D ASIC: EICI 119800 F99230455 ADC(?): ESIC ES8100QB F3A339926 The documentation says the model is 36 bit. Some commands output: [root@localhost root]# pxscan -l on Probing port 0378 SPP port present PS/2 bidirectional port present EPP 1.9 with hardware direction protocol ASIC: E3 scanner model reg= 1 port_ctrl= CC Looks like a Primax Colorado Direct 9600 [root@localhost root]# pxscan -v2 pxscan version 0.41 Probing port 0378 SPP port present PS/2 bidirectional port present EPP 1.9 with hardware direction protocol Read: 184 191 195 Offsetregs set to: 80 80 80 Read: 12 129 133 Offsetregs set to: c0 c0 c0 Read: 0 4 8 Offsetregs set to: a0 c0 c0 Read: 0 4 7 Offsetregs set to: 90 c0 c0 Read: 0 4 8 Offsetregs set to: 88 c0 c0 Read: 0 4 8 Offsetregs set to: 84 c0 c0 Read: 0 4 8 Offsetregs set to: 82 c0 c0 Read: 0 4 8 Offsetregs set to: 81 c0 c0 Read: 196 197 219 Offsetregs set to: 80 80 80 Read: 134 135 156 Offsetregs set to: c0 c0 c0 Read: 0 4 123 Offsetregs set to: a0 c0 e0 Read: 0 4 8 Offsetregs set to: 90 c0 e0 Read: 123 4 8 Offsetregs set to: 98 c0 e0 Read: 40 4 8 Offsetregs set to: 9c c0 e0 Read: 4 4 8 Offsetregs set to: 9c c0 e0 Read: 5 4 8 Offsetregs set to: 9c c0 e0 min= 2 4 8 max= -512 -1344 -544 port_ctrl= CC [root@localhost root]# pxscan --port=0x378 --pos=1x1 --dim=5x5 -n /tmp/test.tif pxscan version 0.41 Probing port 0378 SPP port present PS/2 bidirectional port present EPP 1.9 with hardware direction protocol timeout bit didn't reset, status=97 timeout bit didn't reset, status=97 timeout bit didn't reset, status=97 timeout bit didn't reset, status=97 timeout bit didn't reset, status=97 timeout bit didn't reset, status=97 port_ctrl= E4 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
[<<] [<] Page 1 of 1 [>] [>>] |