plustek: Invalid product ID for Optek Pro UT12
Subject:
Invalid product ID for Optek Pro UT12
From:
"Loren J. Erickson" ####@####.####
Date:
9 Apr 2002 07:14:42 -0000
Message-Id: <200204090707.g3977Nx86742@mail.aros.net>
(Running on RedHat 7.2)
I have downloaded, configured, compiled and installed the sane 1.0.7 backends
and frontends, but I am unable to access my scanner from The Gimp. I get an
'xsane: no devices available' error message when trying to access the xsane
device dialog.
One potential problem that I've noticed is that my scanner Product Id number
is different from either number listed at
http://www.gjaeger.de/scanner/plustek.html. 'usbview' records the following
information about my 'USB Scanner' (below). Note that the Product Id is
0x0001, not 0x0013 or 0x0017. You can also see that the Revision Number is
0.00, not 1.01 or something else. Is this a problem, and if so any ideas
about how I might be able to fix it?
USB Scanner
Speed: 12Mb/s (full)
USB Version: 1.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 07b3
Product Id: 0001
Revision Number: 0.00
Config Number: 1
Number of Interfaces: 1
Attributes: 40
MaxPower Needed: 48mA
Interface Number: 0
Name: (none)
Alternate Number: 0
Class: 10(unk. )
Sub Class: 1
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 81
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 02
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms