plustek: sane-find-scanner does not find my UT16
Subject:
Re: sane-find-scanner does not find my UT16
From:
"Jaeger, Gerhard" ####@####.####
Date:
19 Feb 2002 14:43:32 -0000
Message-Id: <200202191429.PAA14585@kah.ulm.sysgo.de>
On Dienstag, 19. Februar 2002 15:35, Michal Bluj wrote:
> Hello,
>
> I have problem with installing my USB Plustek OpticPro UT16 scanner:
> sane-find-scanner does not find my scanner (I have
> sane-backends/frontends-1.0.7-1 from http://kyrian.ore.org), but my
> system (RH-7.2, kernel-2.4.9-21) can detect it:
> $cat /proc/bus/usb/devices
> (...)
> T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=07b3 ProdID=0017 Rev= 1.00
> S: Manufacturer=Plustek Inc.
> S: Product=USB SCANNER
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl= 16ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
>
> Mayby, someone have any idee what I do wrong?
>
> Cheers,
> Michal
>
Your system has found the scanner ;-)))))))
Have you loaded the scanner module (part of the USB subsystem)?
If not do it! You might have to specify vendor and product id
in your /etc/modules.conf to load the scanner module sucessfully...
Gerhard
