plustek: OptikPro 4800 on Ubuntu 7.04
Subject:
Re: OptikPro 4800 on Ubuntu 7.04
From:
Beate und Gregor Koch ####@####.####
Date:
26 May 2007 12:11:30 +0100
Message-Id: <1180177890.7566.6.camel@aragorn>
Am Freitag, den 25.05.2007, 07:13 +0200 schrieb Gerhard Jaeger:
> On Donnerstag, 24. Mai 2007, Beate und Gregor Koch wrote:
> [SNIPSNAP]
> > make: *** [_module_/tmp/sane-backends-1.0.18/doc/plustek/build] Fehler 2
> > make: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.20-15-generic'
> > There were some build errors...
> > ####@####.####
> > gedit /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c
> > ####@####.####
> >
> >
> > Whats wrong?
> >
> Moin,
>
> sorry for that issue - just checked the CVS logs and saw, that this
> has been fixed, but only in CVS. You need to download i.e. the latest
> snapshot from sane-project.org and use that stuff. There should be
> no need to reinstall all, simply building the kernel-module out of
> the CVS sources.
>
> Sorry for that,
> Gerhard
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
Hi Gerhard
I could build the module now.
There are no erros until the module should be load:
Should I try and load the module?
If this step fails, check the kernel-log.
Press <ENTER> to continue or <CTRL><C> to cancel.
make: Gehe in Verzeichnis '/tmp/sane-backends/doc/plustek/build'
/sbin/modprobe pt_drv || exit 1
rm -f /dev/pt_drv*
mknod: fehlender Operand nach „0“
„mknod --help“ gibt weitere Informationen.
mknod: fehlender Operand nach „0“
„mknod --help“ gibt weitere Informationen.
mknod: fehlender Operand nach „1“
„mknod --help“ gibt weitere Informationen.
mknod: fehlender Operand nach „2“
„mknod --help“ gibt weitere Informationen.
mknod: fehlender Operand nach „3“
„mknod --help“ gibt weitere Informationen.
chgrp: Zugriff auf „/dev/pt_drv*“ nicht möglich: No such file or
directory
chmod: Zugriff auf „/dev/pt_drv*“ nicht möglich: No such file or
directory
make: *** [load] Fehler 1
make: Verlasse Verzeichnis '/tmp/sane-backends/doc/plustek/build'
done.
Should I remove the build directory?
Press <ENTER> to continue or <CTRL><C> to cancel.
Thanks for help
Gregor