plustek: OptikPro 4800 on Ubuntu 7.04
Subject:
Re: OptikPro 4800 on Ubuntu 7.04
From:
Gerhard Jaeger ####@####.####
Date:
28 May 2007 13:02:12 +0100
Message-Id: <200705281411.12013.gerhard@gjaeger.de>
On Samstag, 26. Mai 2007, Beate und Gregor Koch wrote:
> Am Freitag, den 25.05.2007, 07:13 +0200 schrieb Gerhard Jaeger:
> > On Donnerstag, 24. Mai 2007, Beate und Gregor Koch wrote:
> > [SNIPSNAP]
> >
> > > make: *** [_module_/tmp/sane-backends-1.0.18/doc/plustek/build] Fehler
> > > 2 make: Verlasse Verzeichnis '/usr/src/linux-headers-2.6.20-15-generic'
> > > There were some build errors...
> > > ####@####.####
> > > gedit /tmp/sane-backends-1.0.18/doc/plustek/build/plustek-pp_ptdrv.c
> > > ####@####.####
> > >
> > >
> > > Whats wrong?
> >
> > Moin,
> >
> > sorry for that issue - just checked the CVS logs and saw, that this
> > has been fixed, but only in CVS. You need to download i.e. the latest
> > snapshot from sane-project.org and use that stuff. There should be
> > no need to reinstall all, simply building the kernel-module out of
> > the CVS sources.
> >
> > Sorry for that,
> > Gerhard
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: ####@####.####
> > For additional commands, e-mail: ####@####.####
>
> Hi Gerhard
> I could build the module now.
> There are no erros until the module should be load:
>
> Should I try and load the module?
> If this step fails, check the kernel-log.
> Press <ENTER> to continue or <CTRL><C> to cancel.
>
> make: Gehe in Verzeichnis '/tmp/sane-backends/doc/plustek/build'
> /sbin/modprobe pt_drv || exit 1
> rm -f /dev/pt_drv*
> mknod: fehlender Operand nach „0“
> „mknod --help“ gibt weitere Informationen.
Hi,
hmm, I wonder if the module gets loaded or not. What about the
kernel log? (dmesg). Could try and do: modprobe pt_drv and then
lsmod?
The other stuff could be done "by hand" ...
Gerhard
