plustek: the system rejects the compiled driver


Previous by date: 8 Jul 2000 10:06:06 -0000 Re: the system rejects the compiled driver, G. Jaeger
Next by date: 8 Jul 2000 10:06:06 -0000 if epson esc/p2 driver loaded, some wrong colours may be in the scanned image, Paul Buhr
Previous in thread: 8 Jul 2000 10:06:06 -0000 Re: the system rejects the compiled driver, G. Jaeger
Next in thread:

Subject: Re: the system rejects the compiled driver
From: Tim Joseph ####@####.####
Date: 8 Jul 2000 10:06:06 -0000
Message-Id: <Pine.LNX.4.21.0007081100120.32524-100000@mango.timbo.uk>

Hi.

FWIW...

Whenever you updated kernels (I assume from SuSE itself), did you update
the "lx_suse.rpm" package too? (Apologies if that's too obvious)

I've recently upped to the 2.2.16 from SuSE (I'm using SuSE 6.2), and
because of other problems have had to switch on CONFIG_MODVERSIONS. But I
had no problem recompiling and using the pt_drv module.

From,

Tim
-- 
email	####@####.####

On Fri, 7 Jul 2000, G. Jaeger wrote:

> On Fri, 7 Jul 2000 13:54:53 +0200, Paul Buhr wrote:
> 
> >Hello,
> >
> >I tried several versions of the Plustek driver to install. Using SuSE 6.1
> >and SuSE 6.4 and everytime I got the same fault: When I compile the driver
> >and do a "make load" the system answers that this version of pt_drv is
> >written for Kernel 2.2.1 and not compatible with Kernel 2.2.5 (or 2.2.13). I
> >tried different versions of the driver and independant of it I get the same
> >error.
> >
> Hi Paul,
> 
> as I tried all versions from 0.30 on two SuSE systems (6.1 and 6.4), I
> can't
> understand why this happens to you. Two weeks ago I compiled
> the driver on a new installed 6.4 using the Kernel 2.2.14 and it
> worked.
> 
> Maybe you have compiled the Kernel on your own and activated the
> Kernel-dependent module support. This causes exactly such errors.
> You might recompile the Kernel and disabling this feature (menu point
> modules!)
> I checked my 2.2.5 configuration any found out that I have no version
> information with my kernel-symbols.
> I will try to recompile my kernel to force the same problems...
> 
> Gerhard 
> 
> 
> 
> ----------------------------------------
> ####@####.####
> ----------------------------------------
> 
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
> 


Previous by date: 8 Jul 2000 10:06:06 -0000 Re: the system rejects the compiled driver, G. Jaeger
Next by date: 8 Jul 2000 10:06:06 -0000 if epson esc/p2 driver loaded, some wrong colours may be in the scanned image, Paul Buhr
Previous in thread: 8 Jul 2000 10:06:06 -0000 Re: the system rejects the compiled driver, G. Jaeger
Next in thread:


Powered by ezmlm-browse 0.20.