plustek: pt_drv insmod error Plustek P12
Subject:
Re: pt_drv insmod error Plustek P12
From:
"Jaeger, Gerhard" ####@####.####
Date:
6 Feb 2002 07:44:19 -0000
Message-Id: <200202060736.IAA30541@kah.ulm.sysgo.de>
Remove the lp module!
Enable the debug messages in the driver and send the output
of dmesg to the list, so we can see what's happening upon the detection
of the device...
Remove the option forceMode and slowIO...
Gerhard
On Dienstag, 5. Februar 2002 11:09, Peter Scherer wrote:
> Hi,
>
> i have some Problems with SuSE Linux 7.3 and the plustek-module-0_40_15.
>
> I have updatet my Kernel to 2.4.16, than i recompiled the Kernel without
>
> IEEE1284 Support and installed the Modules new.
>
> I set the Par-Port in my Bios to SPP.
>
> linux:~ # cat /proc/sys/dev/parport/parport0/modes
> PCSPP
>
> dmesg shows:
>
> parport0: PC-style at 0x378 [PCSPP(,...)]
> lp0: using parport0 (polling).
> lp0: compatibility mode
>
> But pt_drv doesn t find my Scanner .See the debug Message.
>
> linux:~ # modprobe -d pt_drv
> =============================================
> Module parport
> kname parport
> objkey parport
> names: parport
> mode: NORMAL
> Module matching parport:
> /lib/modules/2.4.16-4GB/kernel/drivers/parport/parport.o
> =============================================
> =============================================
> Module pt_drv
> kname pt_drv
> objkey pt_drv
> names: pt_drv
> options: port=0x378 lampoff=180 warmup=15 lOffonEnd=0 mov=0 slowIO=1
> forceMode=1
> mode: NORMAL
> Module matching pt_drv: /lib/modules/2.4.16-4GB/misc/pt_drv.o
> =============================================
> /lib/modules/2.4.16-4GB/misc/pt_drv.o: init_module: Success
> Hint: insmod errors can be caused by incorrect module parameters, including
> invalid IO or IRQ parameters
> /lib/modules/2.4.16-4GB/misc/pt_drv.o: insmod
> /lib/modules/2.4.16-4GB/misc/pt_drv.o failed
> /lib/modules/2.4.16-4GB/misc/pt_drv.o: insmod pt_drv failed
> linux:~ #
>
>
>
> Can you help me ?
>
> Thanks and Greetings from Peter Germany
>
