nanogui: Freetype 2 and 1
Subject:
Re: [nanogui] Freetype 2 and 1
From:
"Greg Haerr" ####@####.####
Date:
9 Nov 2005 17:29:48 +0000
Message-Id: <0eae01c5e552$99be1f20$0300a8c0@RDP>
: # Must also set FREETYPE_FONT_DIR in the Freetype 1.x section
:
: Is that to say freetype 2.x will not work without freetype 1.x?
No - this merely says that the font directory specifier happens to
live in the freetype 1.x section.
> If this is not the case, can I use FreeType 2.x libs to use ***.ttf font
files?
You can use either FT1 or FT2. Enable the appropriate section,
set the lib location and the font directory location, and you should be OK.
:
: I use the fontdemo.x example to try to determine where my problem is. I
replace the ttf font with bdf font and only fot the following messages:
: ...
: pcf_createfont: helvB12.bdf,27 not found
The above message is printed by the PCF subfont driver, its
looking for a .pcf font, which is a compiled .bdf.
Regards,
Greg
