nanogui: Re: [Handhelds] Microwindows touch screen driver
Subject:
RE: [Handhelds] Microwindows touch screen driver
From:
#YANG XIAOYONG# ####@####.####
Date:
29 Dec 2000 02:18:23 -0000
Message-Id: <A5D4F474BCA0D111AD2408002BA613F88A30A4@mail1.ntu.edu.sg>
Hi Eric,
Thanks for your suggestion.
But I found neither of the solution can solve my problem. After I port the
binary to the Assabet it still looks for the touch screen driver. The first
solution is the same as choose touch screen in the xconfig windows, right? I
tried it before. The error message for the second method is " cannot
initialize mouse, cannot open graphics ". Should I place microwindows in the
same directory as my Linux kernel? Should I port the library to the board
also?
I am looking forward to hear from you.
Regards,
Xiaoyong
-----Original Message-----
From: ####@####.#### ####@####.####
Sent: Thursday, December 28, 2000 12:04 PM
To: ####@####.####
Cc: ####@####.#### ####@####.####
####@####.#### ####@####.#### ####@####.####
Subject: Re: [Handhelds] Microwindows touch screen driver
Hi Xiaoyong,
Happy New Year!
The answer is simple. You just set the macro 'ADSMOUSE = Y' as follows and
set
other mouse or touch screen driver macro to 'N'.
You should compile without error.
ADSMOUSE = Y
Alternatively, you may copy config.arm to config and build. Try.
cp config.arm config
Have a nice compiling!
Eric Wong.
####@####.#### on 12/27/2000 03:50:46 PM
To: ERIC WONG/INF/HKG_VTH/VTECH
cc: ####@####.####
####@####.####
####@####.####
####@####.####
####@####.####
Subject: [Handhelds] Microwindows touch screen driver
Hi Eric,
I have read your message in the site
http://lists.arm.linux.org.uk/pipermail/linux-arm/2000-September/000036.html
. You have successfully downloaded Microwindows to the Assabet board,
right.? I would like to ask you something about the touch screen.
After I run the "make xconfig", I just follow what you said choose the Frame
buffer option and touch screen option. Other than that I choose all the
option in Library option and some other default options..
When I ran the "make clean; make", it stops in the half way. From the error
message it seems that it cannot find the touch screen driver. The screen
shot is attached behind.
Could you please tell me what exact options you have chosen? Should I try
touch pad instead? Or should I look for the touch screen by myself?
Merry X'mas.
Regards,
Xiaoyong
_______________________________________________
Handhelds mailing list
####@####.####
http://handhelds.org/mailman/listinfo/handhelds
_______________________________________________
Handhelds mailing list
####@####.####
http://handhelds.org/mailman/listinfo/handhelds
