nanogui: microwin is terminated
Subject:
Re: microwin is terminated
From:
"Jackie Chang" ####@####.####
Date:
19 Jan 2001 17:53:06 -0000
Message-Id: <001d01c08242$5a32b960$03000004@neontech.com>
It will stop running when it is trying to GdOpenKeyboard(stuck on
kbddev.open(&kbddev)). There is no error message since it doesn't execute
GrError. After I run "ps aux" to check the nano-X process, there is an
message saying stop nano-X, and the process state of the nano-X is T.
For mouse case, the nano-X is properly terminated by saying "can't
initialize mouse".
I will try to run "gpm -R -t ps/2" to test if mouse will be initialized.
What is the correct setting for keyboard on linux framebuffer?
Thanks,
Jackie
----- Original Message -----
From: "Jordan Crouse" ####@####.####
To: "ViewML development list" ####@####.####
Sent: Friday, January 19, 2001 6:55 AM
Subject: Re: microwin is terminated
> What do you mean by crash? Seg fault? Stop working? Is there an
> error message?
>
> When using GPMMOUSE, make sure you start gpm with "gpm -R -t ps/2" This
> will cause the gpm to spit data out to /dev/gpmdata, which the
> microwindows GPM driver picks up.
>
> Jordan
>
> Jackie Chang wrote:
> >
> > I just found out if I configure microwin to no mouse and no keyboard,
then I can run microwin on linux framebuffer. Or, if I set SERIMOUSE=Y, it
will run ok but the mouse is not functioned.
> > Do I need to do any special configuration for mouse and keyboard under
linux framebuffer environment?
> > My current mouse is gpm (gpm -t ps/2). The nano-X will crash if I set
GPMMOUSE=Y OR TTYKEYBOARD=Y or SCANKEYBOARD=Y.
> >
> > tia
> >
> > ----- Original Message -----
> > From: Jackie Chang
> > To: ViewML development list
> > Sent: Thursday, January 18, 2001 1:41 PM
> > Subject: microwin is terminated
> >
> > Hi,
> > I try to run microwin in linux frame buffer, and the process is
terminated when it tried to GdOpenKeyboard.
> > Never return from kbddev.Open(&kbddev)).
> > Any idea what is wrong?
> >
> > Thanks,
> > Jackie
>
> #############################################################
> This message is sent to you because you are subscribed to
> the mailing list ####@####.####
> To unsubscribe, E-mail to: ####@####.####
> To switch to the DIGEST mode, E-mail to ####@####.####
> To switch to the INDEX mode, E-mail to ####@####.####
> Send administrative queries to ####@####.####
>
