nanogui: Could not install microwindows on Linux
Subject:
Re(2): [nanogui] Could not install microwindows on Linux
From:
"Shuichi Matsuo" ####@####.####
Date:
2 Oct 2001 18:05:06 -0000
Message-Id: <01db01c14b6c$bd105580$6201a8c0@INSYDENT>
Hi, Greg
Thank you for your help.
I tested many *.sh samples, but I still can not see any windows.
.
I executed the script from your mail.
"bin/nano-X; bin/nxclock; sleep 10000"
I got the following error message.
-------------------------------------
Cannot initialize mouse
nxclient: retry connect attempt 1
nxclient: retry connect attempt 2
nxclient: retry connect attempt 3
----
nxclient: retry connect attempt 10
Cannot open graphics
-------------------------------------
I executed the next modified script.
"bin/nano-X & bin/nxclock & sleep 10000"
This shows no error but no windows like as before.
Another information
I could run the microwindows under X-window with VGA-card selection. (Not
Framebuffer setting)
But after I set the Framebuffer for console (vga=791 (1024*768 16bits)) and
X-window.
I could not run the microwindows demo under X-window any more.
Something wrong for framebuffer setting????
I am using Mandrake 8.0 not Redhat 7.1 (ordering now).
Please give me any suggestion!!!
Thanks a lot.
Shucihi Matsuo
----- Original Message -----
From: "Greg Haerr" ####@####.####
To: "Shuichi Matsuo" ####@####.#### ####@####.####
Sent: Tuesday, October 02, 2001 11:49 AM
Subject: Re: [nanogui] Could not install microwindows on Linux
> 1. cp Configs/Config.fb Config.
>
> This should be "cp Configs/config.fb config"\
>
> Put the following in a shell script, don't type it in from the console
> (or use one of the many pre-built *.sh scripts):
>
> "bin/nano-X; bin/nxclock; sleep 10000"
>
> Regards,
>
> Greg
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
>
