nanogui: nano-X return code 1 with no error information
Subject:
Re: [nanogui] nano-X return code 1 with no error information
From:
"Greg Haerr" ####@####.####
Date:
1 May 2002 20:22:38 -0000
Message-Id: <00a501c1f14c$90e65ff0$6401a8c0@gregnewport>
> to run under X11 and I can run all of the demos without problem.
Unfortunatly
> when I compile microwindows with framebuffer support, nano-X won't start.
Undoubtably your kernel isn't setup for framebuffer support
correctly. Can you change resolutions using the fbset
utility? run "dmesg | more" to check that the framebuffer
driver initialized correctly.
Regards,
Greg
>
> If I run the demo.sh script my output is
> nxclient: bad readblock -1
> nxclient 7046: Corrupted packet
> nxclient: bad readblock -1
> nxclient 7047: Corrupted packet
> ./demo.sh: line 1: 7046 Broken pipe bin/nanowm
> ./demo.sh: line 1: 7047 Broken pipe bin/world
>
> and if I just run nano-X I still get the 1 errorcode ($?) and no error
> information
> and it won't run.
> Also, if I run nano-X & it immediatly goes into a stopped state.
> ([1]+ Stopped bin/nano-X)
>
> Any other ideas?
>
> Thanks,
> Anthony
>
> BTW: framebuffer support is compiled into my kernel, and I do see the
> penduin when
> I boot, and I'm in vesa fb mode 0301 if that helps.
>
> At 12:03 AM 5/1/2002 +0200, Pierre Tardy wrote:
> >On Tue, 30 Apr 2002 17:29:43 -0400
> >Anthony Rassin ####@####.#### wrote:
> >
> > >
> > > I've compiled the microwindows 0.89pre8 tarbal on my machine
> > > and everything seemed to compile fine. I then tried to execute
> > > some of the demos in the demo dir and I can not get nano-X to
> > > run. I'm just starting it at the command line by typing 'nano-X'
> > > and the screen will blink but a ps -ef shows that nano-X is NOT
> > > running. The $? after running nano-X is 1 but there is no error
> > > information printed to stderr or stdout when I execute it.
> >you should run the demo by running demo##.sh
> >or, for ex:
> >bin/nano-X & bin/nanowm & bin/launcher bin/launcher.cnf
> >run the core window manager and the demo
> >
> >Pierre
> >--
> >c'est quoi ce quatre et ce huit, dans mon adresse email ???
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: ####@####.####
> For additional commands, e-mail: ####@####.####
>
