nanogui: Touchscreen driver problem
Subject:
RE: [nanogui] Touchscreen driver problem
From:
"Aradhana Prasad (OCS-BLRSJP-PEG)" ####@####.####
Date:
18 Jun 2002 05:43:18 -0000
Message-Id: <581D4BBC9B3EFD4C966372E1AE6CFD81015FCD98@blrhomx2.wipro.co.in>
But the cross development environment I had built was based on 2.4.* headers. I am not using any of 2.5.* header files during this compilation.
-----Original Message-----
Aradhana Prasad (OCS-BLRSJP-PEG) wrote:
> Thanks a lot for your immediate response, I downloaded microwin-aph-01-Jun-2002.tar.gz, and tried by compiling as you told.
> But its always bailing out with 2 errors. (am using linux-2.5.6-rmk1)
I haven't tried a 2.5 kernel on ARM yet but hopefully Russell won't have
changed the touchscreen driver interface again ;)
> Compiling vgaplan4.c ...
> In file included from vgaplan4.h:23,
I don't think you want to be using vga16 with an ARM board. Set FBVGA=N
in the config file.
> Compiling client.c ...
> client.c: In function `GrServiceSelect':
> client.c:883: inconsistent operand constraints in an `asm'
Your build environment appears to be choking on the FD_ZERO() and
FD_ISSET() macros (they should be defined in sys/select.h). Maybe
there's some kind of header file mismatch somewhere?
--
------------ Alex Holden - http://www.linuxhacker.org ------------
If it doesn't work, you're not hitting it with a big enough hammer
