plustek: 9636T not loading
Subject:
9636T not loading
From:
John Bennett ####@####.####
Date:
3 Jun 2002 11:50:08 -0000
Message-Id: <5.1.0.14.0.20020603213512.00b975f8@mail.powerup.com.au>
Can anybody help with my prob??
System is:
Plustek 9636T Scanner
RedHat V7.3
Gimp 1.2.3
Sane backends V1.0.7-6
Sane Frontends V1.0.7-2
(Have also tried using the latest tar balls.)
plustek-module-0_41_5.tar.gz
(have tried various other combinations with same result.)
Following are the results I am getting.......
**********************************************************************
[root@boss root]# modprobe pt_drv
/lib/modules/2.4.18-3custom/misc/pt_drv.o: init_module: Success
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or
IRQ parameters
/lib/modules/2.4.18-3custom/misc/pt_drv.o: insmod
/lib/modules/2.4.18-3custom/misc/pt_drv.o
failed
/lib/modules/2.4.18-3custom/misc/pt_drv.o: insmod pt_drv failed
[root@boss root]#
[root@boss temp]# insmod pt_drv
Using /lib/modules/2.4.18-3custom/misc/pt_drv.o
/lib/modules/2.4.18-3custom/misc/pt_drv.o: init_module: Success
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or
IRQ parameters
[root@boss temp]#
**********************************************************************
[root@boss temp]# lsmod
Module Size Used by Not tainted
emu10k1 56032 1 (autoclean)
ac97_codec 11808 0 (autoclean) [emu10k1]
parport_pc 18564 0 (autoclean)
parport 35488 0 (autoclean) [parport_pc]
3c59x 27656 1
ipchains 48072 9
ide-scsi 9248 0
vfat 11804 1 (autoclean)
fat 36024 0 (autoclean) [vfat]
**********************************************************************
Contents of modules.conf
alias parport_lowlevel parport_pc
alias eth0 3c59x
alias sound-slot-0 emu10k1
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null
2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null
2>&1 || :
alias usb-controller usb-uhci
alias char-major-40 pt_drv
pre-install pt_drv modprobe -k parport
options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=0 mov=0 slowIO=0
forceMode=0
************************************************************************
Anybody got any ideas??
All appreciated....
Thanks,
John.
