plustek: CanoScan N670U under SANE 1.0.8
Subject:
Re: CanoScan N670U under SANE 1.0.8
From:
####@####.####
Date:
4 Oct 2002 12:27:02 -0000
Message-Id: <200210041424.19017.c.roessner@roessner-online.de>
Am Donnerstag, 3. Oktober 2002 23:28 schrieben Sie:
> Christian,
>
> I have one of these N670U, and mine is a pure USB device. Parallel port
> support (in the form of pt_drv.o in particular) has nothing to do with
> getting it to scan. Yours may be different, of course. Canon might be
> selling the scanner in parallel port version, too, for all I know.
>
> Theodore Kilgore
My scanner is also a pure USB model, but it does not work. How did you set up
your plustek.conf to get your scanner working?
Regards
Christian
>
> On Thu, 3 Oct 2002, Christian [iso-8859-15] Rößner wrote:
> > Hello,
> >
> > I am working with the developers of canonscanner.sourceforge.net and have
> > worked on the CanoScan N670U. Before helping them, I looked at the SANE
> > project page and I could not find a hint for support of my scanner model.
> >
> > Today I had too much time and I surfed through the web, finding out that
> > SANE has changed its website overview of supported scanners. I looked for
> > my model and was wondering it should be supported by the plustek backend.
> > So I have spent my time for low :-(
> >
> > Now my question: Because of working on a backend, my scanner already is
> > included in modules.conf with vendor id 0x04a9 and product id 0x220d.
> > Although I have set up the plustek.conf with
> >
> > [usb] 0x04A9 0x220D
> > device /dev/usbscanner
> >
> > xsane is unable to find my scanner. I took the original plustek.conf and
> > put hash markes before [paralell] and device /dev/pt_drv. The rest of the
> > given options are still untouched, except the two options mentioned
> > below.
> >
> > What could be wrong? If the scanner is really working with this backend,
> > I have to tell the developers of canonscanner.sf.net that they can stop
> > supporting the N670U.
> >
> > I was pleased to get an answer
> >
> > Regards
> >
> > Christian
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: ####@####.####
> > For additional commands, e-mail: ####@####.####
