plustek: CanoScan N670U under SANE 1.0.8
Subject:
Re: CanoScan N670U under SANE 1.0.8
From:
"Jaeger, Gerhard" ####@####.####
Date:
4 Oct 2002 13:56:28 -0000
Message-Id: <17xStf-1NyX4KC@fmrl11.sul.t-online.com>
Hi Christian,
On Friday, 4. October 2002 14:24, Christian Rößner wrote:
[SNIPSANP]
> > > Hello,
> > >
> > > I am working with the developers of canonscanner.sourceforge.net and
> > > have worked on the CanoScan N670U. Before helping them, I looked at the
> > > SANE project page and I could not find a hint for support of my scanner
> > > model.
> > >
> > > Today I had too much time and I surfed through the web, finding out
> > > that SANE has changed its website overview of supported scanners. I
> > > looked for my model and was wondering it should be supported by the
> > > plustek backend. So I have spent my time for low :-(
You might can help to improve the Plustek backend here as the calibration does
currently not work
> > > Now my question: Because of working on a backend, my scanner already is
> > > included in modules.conf with vendor id 0x04a9 and product id 0x220d.
> > > Although I have set up the plustek.conf with
> > >
> > > [usb] 0x04A9 0x220D
> > > device /dev/usbscanner
The setup seems to be okay BUT you will need at least the latest SANE
snapshot 1.0.9-pre to make the scanner work.
Hope this helps
Gerhard
