plustek: HP2300C not a LM9831 or LM9832 chip based scanner.
Subject:
Re: HP2300C not a LM9831 or LM9832 chip based scanner.
From:
"Jaeger, Gerhard" ####@####.####
Date:
1 Nov 2002 13:40:33 -0000
Message-Id: <187by1-0oXhLcC@fmrl00.sul.t-online.com>
Hi,
I think there's nothing more to test! It might be, that the test goes
wrong and the HP2300C does contain a LM983x but I don't think
so. You might want to open the scanner and check the chipset
(at least it was no problem to open the 2200c...)
That's all I can say so far
Gerhard
On Thursday, 31. October 2002 00:18, Herbert Straub wrote:
[SNIP]
> Hallo,
>
> i connect a HP2300C USB Scanner and modify the modify the plustek-dev.c
> file (copy the 2200 entries and modify the product/vendor id). Not
> loading the scanner kernel modul;
[SNIP-SNAP]
>
> [plustek] UIO error
> [plustek] This is not a LM9831 or LM9832 chip based scanner.
> [plustek] open failed: -1
> [plustek] sane_get_devices (0xbffff7a4, 0)
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
> [plustek] sane_exit
>
> Any hints, suggestions or further tests?