plustek: negative/slide backlight does not work Plustek OpticPro PT12
Subject:
Re: negative/slide backlight does not work Plustek OpticPro PT12
From:
"Jaeger, Gerhard" ####@####.####
Date:
6 Jan 2003 19:25:30 -0000
Message-Id: <18VckO-0CYCPIC@fmrl10.sul.t-online.com>
Hi,
here (Kernel 2.4.19 with IEEE1248 support), module-0_42_9
and SANE 1.0.9 there are no problems so far...
The IEEE stuff should only be disabled if there are any
problems...
Gerhard
On Saturday, 4. January 2003 13:00, Motyle wrote:
> I have Plustek OpticPro PT12 scanner. It works reasonably well (1) in the
> normal mode using Debian sarge, sane-1.0.7 (not modified) and
> plustek-module-0_41_5 with 2.4.19 kernel.
>
> But when I switch to transparency or negative mode both lights turn dark.
> Is there any trick to switch ON this backlight. I have not changed any
> settings in module options (
>
> alias char-major-40 pt_drv
> pre-install pt_drv modprobe -k parport
> options pt_drv lampoff=180 warmup=15 port=0x378 lOffonEnd=1 mov=0 slowIO=0
> \ forceMode=0
>
> and also use all defaults in /etc/sane.d/plustek.conf
>
> The results are the same with plustek-module-0_42 _9 and sane-1.0.9
> I am using xsane and xscanimage when testing.
>
> Best regards,
